The S0v2 is a high quality yet simple to operate radio broadcast mixer, or console, ideally suited to community radio stations, for educational purposes and for internet radio.

The S1 has an amazing feature set and offers a proper broadcast solution to community, educational and student radio stations that need a versatile, reliable radio broadcast mixer or console.

The S2-05 is a 5 channel width mixer desk or console.

The S2-05-NM is a 5 channel width mixer desk or console. with no Meterbridge.

The S2-10 is a 10 channel width mixer desk or console.

The S2-10-NM is a 10 channel width mixer desk or console, with no Meterbridge.

The S2-15 is a 15 channel width mixer desk or console.

The S2-15-NM is a 15 channel width mixer desk or console, with no Meterbridge.

The S2-20 is a 20 channel width mixer desk or console.

The S2-20-NM is a 20 channel width mixer desk or console, with no Meterbridge.

The S2-25 is a 25 channel width mixer desk or console.

The S2-25-NM is a 25 channel width mixer desk or console, with no Meterbridge.

The S2-30 is a 30 channel width mixer desk or console.

The S2-30-NM is a 30 channel width mixer desk or console. with no Meterbridge.

This is used to connect two S2 chassis so that they can function as one mixer.

The 6 way stereo line source select channel has 6 balanced stereo inputs on a 25 way D-type connector selectable by a 6 way mechanical interlocking switch bank, numbered 1 - 6.

The S2-CDASE dual stereo line channel has one 24-bit 96kHz AES/EBU digital input and one balanced analogue stereo input, both on Neutrik XLR connectors and is fitted with equalisation, providing 10dB cut and boost at HF (6.5kHz) and LF (100Hz).

The digital dual stereo channel has two 24-bit 96kHz digital inputs with an INP 1/INP 2 button switch to select between them.

The digital dual stereo channel has two 24-bit 96kHz digital inputs and is fitted with equalisation.

The mic/line input channel is a mono input with a button switch to select either Mic or Mono Line.

The mic/mic input channel is a dual mono microphone input with a button switch to select either Mic 1 or Mic 2.

The S2-CSE dual stereo line channel with EQ has two balanced stereo inputs on Neutrik XLR connectors and is fitted with equalisation.

The S2-CSGE channel is the dual stereo line channel with an RIAA input amplifier on the second input and is fitted with equalisation, providing 10dB cut and boost at HF (6.5kHz) and LF (100Hz).

The stereo mix-minus channel has one balanced stereo line level input and a balanced stereo mix-minus output, on XLR connectors.

The telco input channel controls the connection to a telephone balance unit (or hybrid).

The S2-M6SS meterbridge source selector panel produces a stereo analogue audio output from 6 selectable stereo analogue sources, which can be connected to a stereo input channel within the mixer, or the EXT 1 and EXT 2 monitor inputs, to provide up to 12 external monitor inputs.

The S2-ML speaker is used for monitoring PFL and reverse talkback in the control room directly from the mixer.

The S2-ML53 LED meter consists of 53 LEDs showing both VU and peak representation.

MPPM panel has two fast-reading moving-coil meters with PPM-style scale.

The S2-MSB1 is a meterbridge panel, 1 channel wide, with 1 button which can be used for bespoke control of the S2, or for your own purposes, e.g. equipment control.

The S2-MSB3 is a meterbridge panel, 1 channel wide, with 3 buttons which can be used for bespoke control of the S2, or for your own purposes.

Each of the dual timers can be used for timing events triggered by Timer 1, Timer 2, or the Mic fader open signal.

The S2-MTB6 is used for communicating with up to 6 other locations, studios or mixers, and with the Sonifex TB-6D and TB-6R talkback intercoms.

The S2-MVU two moving coil VU meters are configured such that a 1kHz signal, at +4dBu at the PGM output, will indicate a meter reading of 0VU.

This channel is common to every mixer and provides a digital and analogue output from the AUD mix bus.

This channel is common to every mixer and provides a digital and analogue output from the AUD mix bus. It also has a 100mm VCA output fader for production use which provides unity gain when fully open.

This channel is common to every mixer and provides a digital and analogue output from the PGM mix bus.

This channel is common to every mixer and provides a digital and analogue output from the PGM mix bus.

The control room monitor channel is common to every mixer and is used for monitoring various sources on the control room loudspeakers or on headphones.

The studio monitor channel is optional and is used for the monitoring of various sources on the studio loudspeakers or studio headphones.