Distribution Amplifiers

RB-DA6G

6 Way Stereo Distribution Amplifier With Output Gain Control

The RB-DA6G is a 1U rack-mount high performance 6 way stereo distribution amplifier for splitting a source into a number of different outputs.

RK3_logo-optimized

About RB-DA6G

The RB-DA6G is a 1U rack-mount high-performance 6 way stereo distribution amplifier for splitting a source into a number of different outputs. The RB-DA6G has one stereo input and six stereo outputs. It can also be configured to distribute a single mono input to twelve outputs. This is enabled via a recessed front-panel switch to prevent unintended switching. The XLR-3 inputs and outputs are electronically balanced and can be wired unbalanced. Each output is individually buffered so that a short circuit on one output won’t affect the others. Individual output gain may be varied from -8dB to 18dB, which is useful for normalising consumer and professional signals to give outputs of -15dBu and 0dBu respectively.

Typical Applications

Distribute line level signals to multiple reporters in a broadcast centre, distribute main programme output from a mixer to other studios, create multiple feeds of a recorded signal at different output levels.

Product Data

Technical Specifications

Audio Specification
Maximum Input Level:
+28dBu
Maximum Output Level:
+28dBu
Frequency Response:
20Hz to 20kHz ±0.1dB (600Ω load, ref 1kHz)
Gain Range:
Adjustable 8dB loss to 18dB gain (12 adjustable pots)
Common Mode Rejection:
>66dB typically
Input impedance:
>20kΩ bridging
Output impedance:
<50Ω
Distortion:
0.01% THD @ 1kHz, ref +8dBu output
Noise:
-88dB unity gain, ref +8dBu output
Connections
Inputs:
2 x XLR 3 pin female (balanced, can be unbalanced)
Outputs:
12 x XLR 3 pin male (balanced, can be unbalanced)
Mains Input:
Filtered IEC, switchable 110-120V, or 220-240V, fused, 6W max
Fuse Rating:
Anti-surge fuse 100mA 20 x 5mm (230VAC)
Fuse Rating:
Anti-surge fuse 250mA 20 x 5mm (115VAC)
Equipment Type
RB-DA6G
6 way stereo distribution amplifier with output gain control
Physical Specification
Dimensions (Raw):
48cm (W) x 10.8cm (D) x 4.2cm (H) (1U)
Dimensions (Raw):
19” (W) x 4.3” (D) x 1.7” (H) (1U)
Dimensions (Boxed):
58.5cm (W) x 22.5cm (D) x 7cm (H)
Dimensions (Boxed):
23” (W) x 8.9” (D) x 2.8” (H)
Weight:
Nett: 1.3kg  Gross: 1.9kg
Weight:
Nett: 2.9lbs Gross: 4.2lbs

Downloads & Resources

Support

Handbooks & Guides

RB-DA6G HandbookDownload ↗

Firmware

No firmware currently listed.

Firmware Notes

Full release notes for all firmware versions will appear here when available.

Brochures

Brochures, guides and supporting literature are available from the Sonifex brochures library.Visit brochures page ↗

Declarations

Access CE and UKCA declarations and other product compliance documentation.Visit declarations page ↗