Distribution Amplifiers

RB-DA4x5

4 Input, 4 x 5 Output Distribution Amplifier/Mixer

The RB-DA4x5 is a 1U rack-mount combined distribution amplifier and mixer.

RK3_logo-optimized

About RB-DA4x5

The RB-DA4x5 is a 1U rack-mount combined distribution amplifier and mixer, featuring four mono analogue audio inputs on female XLR connectors and four groups of five outputs on 15-way D-type connectors.

Each output group is controlled by a front-panel 5-way DIP switch, allowing selection and mixing of any input, or a 1kHz 0dBu test tone, to that group.

All inputs and outputs are electronically balanced, with each input offering adjustable gain from -8dB to +18dB via preset potentiometers. Output groups also have adjustable gain across the same range.

Each output is individually buffered, ensuring a fault on one does not affect the others.

The DIP switches and gain controls are recessed behind a screw-on front cover to prevent accidental adjustment in secure installations.

Four front-panel LEDs display signal presence for either inputs or output groups (selectable via the AUDIO PRESENCE button), indicating levels as follows: green (-12dB to 0dB), amber (0dB to +6dB), and red (+6dB and above).

Typical Applications

Distribute line-level signals to multiple reporters in a broadcast centre; distribute a PC automation output to up to five studios in a radio station; distribute a main programme output from a mixer to other studios; create multiple mix-minus feeds; or generate multiple stereo-to-mono outputs.

Product Data

Technical Specifications

Audio Specification
Maximum Input Level:
+28dBu
Maximum Output Level:
+28dBu
Frequency Response:
20Hz to 20kHz ±0.1dB (600Ω load, ref 1kHz)
Input Gain Range:
Adjustable 8dB loss to 18dB gain (channel 1-4 adjust)
Output Gain Range:
Adjustable 8dB loss to 18dB gain (group 1-4 adjust)
Input impedance:
>20kΩ bridging
Output impedance:
<50Ω
Distortion:
0.01% THD @ 1kHz, ref +8dBu output
Noise:
-100dB unity gain, ref +8dBu output
Common Mode Rejection:
>66dB typically
Connections
Inputs (4 x Mono):
4 x XLR 3 pin female (balanced, can be unbalanced)
Outputs (20 x Mono):
4 x 15 way D-type male plug (balanced, can be unbalanced)
Mains Input:
Filtered IEC, switchable 110-120V, or 220-240V, fused, 9W max
Fuse Rating:
Anti-surge fuse 100mA 20 x 5mm (230VAC)
Fuse Rating:
Anti-surge fuse 250mA 20 x 5mm (115VAC)
Equipment Type
RB-DA4x5
4 Input, 4 x 5 output distribution amplifier/mixer
Physical Specification
Dimensions (Raw):
48cm (W) x 15.8cm (D*) x 4.2cm (H) (1U)
Dimensions (Raw):
19” (W) x 6.2” (D*) x 1.7 (H) (1U)
Dimensions (Boxed):
59cm (W) x 27.5cm (D*) x 11cm (H)
Dimensions (Boxed):
23.2” (W) x 10.8” (D*) x 4.3” (H)
Weight:
Nett: 1.6kg  Gross: 2.2kg
Weight:
Nett: 3.5lbs Gross: 4.8lbs
* Note that this product is deeper than standard Redboxes

Downloads & Resources

Support

Handbooks & Guides

RB-DA4x5 HandbookDownload ↗

Firmware

No firmware currently listed.

Firmware Notes

Full release notes for all firmware versions will appear here when available.

Brochures

Brochures, guides and supporting literature are available from the Sonifex brochures library.Visit brochures page ↗

Declarations

Access CE and UKCA declarations and other product compliance documentation.Visit declarations page ↗