Discontinued AVN

AVN-AESIO8R (Superseded)

Replaced by the following: AVN-AESIO8-DNT & AVN-AESIO8-RAV

The AVN-AESIO8R converts up to 8 channels of AES3 in and 8 channels of AES3 out to and from the Dante network, with full power and data redundancy.

AES67_logo-optimized DDMready_logo-optimized

About AVN-AESIO8R

The AVN-AESIO8R audio converter and interface converts up to eight digital stereo AES3 inputs and eight digital stereo AES3 outputs to and from the Dante Audio-over-IP networking standard. Each input can accept sample rates from 32kHz to 192kHz, which will be sample rate converted to the Dante system sample rate. A valid input signal is confirmed by front panel AES3 lock LEDs for each input. All outputs follow the Dante system sample rate. Dual Ethernet ports allow the unit to operate in redundant mode, ensuring audio routing is maintained in the event of loss of link on either of the network connections. This cost effective 1U rack-mount unit offers an easy solution for AV professionals and system integrators. It is simple to configure and operate, with all set-up done via the standard Dante Controller software and power via PoE (Power Over Ethernet). All digital AES3 inputs and outputs are on high-quality Neutrik XLR connectors and there are front panel status/confidence LEDs for PoE, Link and Clock. (The AVN-AESIO8 is available with a single Ethernet port).

Typical Applications

The AVN-AESI08R is suited to a wide range of professional audio environments where reliable, low-latency transport between digital and networked systems is required. It is ideal for broadcast studios, live production and events, OB trucks, and fixed AV installations such as corporate, education, and hospitality spaces. It also integrates seamlessly into houses of worship and recording studios, providing flexible, high-quality connectivity between traditional digital equipment and Dante-based audio networks.

Product Data

Technical Specifications

Network and AoIP
AoIP Standard:
Dante
Number of Channels:
16 receive, 16 transmit
Number of Streams:
16 receive, 16 transmit
Sample Rate:
44.1kHz, 48 kHz, 88.2kHz, 96kHz, 176.4kHz or 192kHz
Format:
Linear PCM, 16, 24 or 32 bit
AES67 Support:
Yes
Connectivity:
2 x RJ45
Speed:
1Gbps or 100Mbps
Network Modes:
Switched or redundant
Dante Domain Manager Ready:
Yes
AES3 Input Specifications
Input Impedance:
110Ω balanced
Support Input Rates:
32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz and 192kHz (sample rate converted to Dante system sample rate).
Signal Level:
AES3-2009 compliant
Bit Depth:
Up to 24bits
AES3 Output Specifications
Output Impedance:
110Ω balanced
Support Output Rates:
44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz and 192kHz (set as per Dante system sample rate).
Signal Level:
AES3-2009 compliant
Bit Depth:
24 bits
Balanced Line Input XLR Pinout
Pin
Function
1
Chassis Ground
2
Input Positive
3
Input Negative
Balanced Line Output XLR Pinout
Pin
Function
1
Chassis Ground
2
Output Positive
3
Output Negative
PoE Power
Standard
802.3af
Class
0
PD Power Range
0.44 W to 12.94 W
Typical PSE Power Usage
7W
Max PSE Power Usage
15.4 W
Equipment Type
AVN-AESIO8R:
8 AES3 Input, 8 AES3 Output Dual Dante® Interface, PoE
Physical Specification
Dimensions (Raw):
48cm (W) x 11cm (D) x 4.3cm (H)(1U)
Dimensions (Raw):
19” (W) x 4.3” (D) x 1.7” (H)
Weight:
Nett: 1.0kg Gross: 1.5kg
Weight:
Nett: 2.2lbs Gross: 3.3lbs

Downloads & Resources

Support

Handbooks & Guides

AVN-AESIO8RHandbookDownload ↗
The AVN GuideDownload ↗

Firmware

Firmware
Download ↗

Firmware Notes

Full release notes for all firmware versions will appear here when available.

Brochures

Brochures, guides and supporting literature are available from the Sonifex brochures library.Visit brochures page ↗

Declarations

Access CE and UKCA declarations and other product compliance documentation.Visit declarations page ↗