Headphone Amplifiers

RB-DHD6

Digital 6-Way Stereo Headphone Distribution Amplifier

The RB-DHD6 digital 6 way headphone distribution amplifier is a 1U rack-mount which receives a digital input signal, as either AES/EBU or S/PDIF and converts it to 6 individually buffered, jack-plug, headphone outputs, each with their own volume control.

24bit96_logo-optimized RK3_logo-optimized

About RB-DHD6

The RB-DHD6 digital 6 way headphone distribution amplifier is a 1U rack-mount which receives a digital input signal, as either AES/EBU or S/PDIF and converts it to 6 individually buffered, jack-plug, headphone outputs, each with their own volume control. Useful for connection to digital mixing desks, digital routers and matrices, the RB-DHD6 connects directly to an AES/EBU or S/PDIF output to provide the highest quality audio directly to the headphones. The input connectors consist of a single balanced XLR-3 for the AES/EBU input and a single unbalanced phono connector for the S/PDIF input. A button located on the rear panel is used to select either the AES/EBU, or S/PDIF, input and de-emphasis on the output can be controlled via dipswitch. If de-emphasis is selected, the RB-DHD6 will decode 50/15µs emphasis when indicated by certain channel status bits in the incoming digital audio data. When operating, the front panel power LED flashes red and amber whenever the unit is not synchronised to the incoming digital signal.

Typical Applications

Provides multiple guest headphone outputs from the digital output of a radio mixer or router matrix.

Product Data

Technical Specifications

Audio Specification
Output Level:
Drives 150mW into 32Ω to 600Ω headphones
Dynamic Range:
>100dB
Input Impedance:
110Ω ±20% AES/EBU 75Ω ±15% S/PDIF
Max Output Level:
+18dBu
D to A Line-Up:
-12dBFS = +18dBu (max volume)
Headphone Gain Range:
-80dBu (min Volume) to +18dBu (max volume)
Sample Frequency Range:
30kHz-100kHz
Connections
Digital Inputs:
1 x AES/EBU XLR 3 pin female, 1 x S/PDIF RCA phono
Headphone Outputs:
6 x ¼” (6.35mm) A/B-gauge 3-pole stereo jack sockets
Mains Input:
Filtered IEC, 110V-120V, or 220-240V, fused, 10W max
Fuse Rating:
Anti-surge fuse 100mA 20 x 5mm (230VAC), Anti-surge fuse 250mA 20 x 5mm (115VAC)
Operational Controls
De-emphasis On/Off:
DIP switch selection
Digital Input Select:
AES/EBU or S/PDIF, via push-switch
Equipment Type
RB-DHD6
Digital 6 way stereo headphone distribution amplifier
Physical Specification
Dimensions (Raw):
48cm (W) x 10.8cm (D) x 4.2cm (H) (1U)
19” (W) x 4.3” (D) x 1.7” (H) (1U)
Dimensions (Boxed):
58.5cm (W) x 22.5cm (D) x 7cm (H)
23” (W) x 8.9” (D) x 2.8” (H)
Weight:
Nett: 1.6kg  Gross: 2.2kg
Nett: 3.5lbs Gross: 4.8lbs

Downloads & Resources

Support

Handbooks & Guides

RB-DHD6 HandbookDownload ↗

Firmware

No firmware currently listed.

Firmware Notes

Full release notes for all firmware versions will appear here when available.

Brochures

Brochures, guides and supporting literature are available from the Sonifex brochures library.Visit brochures page ↗

Declarations

Access CE and UKCA declarations and other product compliance documentation.Visit declarations page ↗