Signal Converters

RB-LU4

Quad Stereo Balanced to Unbalanced Converter

The RB-LU4 is a 1U rack-mount quad stereo unit for interfacing professional balanced line levels to domestic or semi-pro unbalanced equipment.

RK3_logo-optimized FR1_logo-optimized

About RB-LU4

The RB-LU4 is a 1U rack-mount quad stereo unit for interfacing professional balanced line levels to domestic or semi-pro unbalanced equipment, e.g. for connecting a pro satellite receiver to a consumer hi-fi system. All connections are on the rear panel. The eight balanced XLR-3 inputs have an impedance of 20kΩ and are routed to eight unbalanced RCA outputs with an output impedance of <50Ω.

The output gain can be individually adjusted for left and right channels by using pre-set potentiometers accessible through the rear panel. A LED power indicator on the front panel displays the power supply connection.

Typical Applications

Interfacing a professional satellite receiver to an unbalanced hi-fi system.

Product Data

Technical Specifications

Audio Specification
Maximum Input Level:
+28dBu
Input Impedance: (XLR)
>20kΩ balanced bridging
Output Impedance (RCA):
<50Ω
Maximum Output Level:
+22dBu
Distortion:
0.01% THD @ 1kHz, ref +8dBu output
Noise:
-100dB, unity gain, ref +8dBu output
Common Mode Rejection:
>66dB typically
Frequency Response:
20Hz to 20kHz ±0.1dB (600Ω load, ref 1kHz)
Gain Range:
Unbalanced Output : -28dBu to 0dBu, ref 0dBu into balanced XLR input
Connections
Inputs:
8 x XLR 3 pin female (Balanced)
Outputs:
8 x RCA phono (Unbalanced)
Mains Input:
Filtered IEC, switchable 110-120V, or 220-240V, fused, 6W max
Fuse Rating:
Anti-surge fuse 100mA 20 x 5mm (230VAC)
Fuse Rating:
Anti-surge fuse 250mA 20 x 5mm (115VAC)
Equipment Type
RB-LU4:
Quad stereo balanced to unbalanced converter
Physical Specification
Dimensions (Raw):
48cm (W) x 10.8cm (D) x 4.2cm (H) (1U)
Dimensions (Raw):
19” (W) x 4.3” (D) x 1.7” (H) (1U)
Dimensions (Boxed):
58.5cm (W) x 22.5cm (D) x 7cm (H)
Dimensions (Boxed):
23” (W) x 8.9” (D) x 2.8” (H)
Weight:
Nett: 1.3kg  Gross: 1.9kg
Weight:
Nett: 2.9lbs Gross: 4.2lbs

Downloads & Resources

Support

Handbooks & Guides

RB-LU4 HandbookDownload ↗

Firmware

No firmware currently listed.

Firmware Notes

Full release notes for all firmware versions will appear here when available.

Brochures

Brochures, guides and supporting literature are available from the Sonifex brochures library.Visit brochures page ↗

Declarations

Access CE and UKCA declarations and other product compliance documentation.Visit declarations page ↗