AVN-AIO8 (Superseded)
Replaced by the following: AVN-AIO8-DNT & AVN-AIO8-RAV
8 Input, 8 Output Dante® Interface, PoE
/aio8-front-optimized.webp)
/AIO8-iso-optimized.webp)
/AIO8-rear-optimized.webp)
/AES67_logo-optimized.webp){kind=logo}
/DDMready_logo-optimized.webp){kind=logo}
/Dante_Logotype_Black-optimized.webp)
AVN-AIO8 (Superseded)
Replaced by the following: AVN-AIO8-DNT & AVN-AIO8-RAV
The AVN-AIO8 audio converter and interface converts up to eight analogue inputs and eight analogue outputs to and from the Dante Audio-over-IP networking standard. This cost effective 1U rack-mount unit offers an easy solution for AV professionals and system integrators. It is simple to configure and operate, with all set-up, except line-up levels, done via the standard Dante Controller software and power via PoE (Power Over Ethernet). All analogue inputs and outputs are on high-quality Neutrik XLR connectors and there are front panel status/confidence LEDs for PoE, Link, and Clock. Global 0dBFS line-up can be set to +12dBu, +18dBu or +24dBu to meet your specific requirement via the front panel recessed toggle switch.
Product Features
8 x balanced analogue inputs on XLR.
8 x balanced analogue outputs on XLR.
1 x RJ45 Dante connector (1Gb/s Ethernet Port).
POE, Link, and Clock LED status indicators.
Configuration using Dante Controller.
AES67 & Dante Domain Manager compliant.
Powered by PoE.
1U 19” rack-mount form factor.
Typical Applications
Product Category
Discontinued AVNTECHNICAL SPECIFICATIONS
Network and AoIP | |
|---|---|
| AoIP Standard: | Dante |
| Number of Channels: | 8 receive, 8 transmit |
| Number of Streams: | 8 receive, 8 transmit |
| Sample Rates: | 44.1kHz, 48 kHz, 88.2kHz, 96kHz, 176.4kHz or 192kHz |
| Format: | Linear PCM, 16, 24 or 32 bit |
| AES67 Support: | Yes |
| Connectivity: | 1 x RJ45 |
| Speed: | 1Gbps or 100Mbps |
| Dante Domain Manager Ready: | Yes |
Audio Input Performance Specifications | |
| Parameter | Line Input |
| Input Impedance: | >20kΩ balanced |
| 0dBFS line-up: | User Selectable +12dBu/+18dBu/+24dBu balanced |
| Frequency Response: | 20Hz to 20kHz, +0/-0.2dB |
| THD+N: | <-110dBFS, -30dBFS, 20Hz to 20kHz, 20kHz BW |
| Noise: | -110dBFS, 20kHz BW, Rs=200Ω |
| Crosstalk: | <-100 dB |
| Common Mode Rejection: | >60dB @ 1kHz |
Audio Output Performance Specifications | |
| Parameter | Line Output |
| Output Impedance: | <50Ω balanced |
| 0dBFS line-up: | User Selectable +12dBu/+18dBu/+24dBu balanced |
| Frequency Response: | 20Hz to 20kHz, +0/-0.5dB |
| THD+N: | <-107dBFS, -30dBFS, 20Hz to 20kHz, 20kHz BW |
| Noise: | -107dBFS, 20kHz BW |
| Crosstalk: | <100dB |
Balanced Line Input XLR Pinout | |
| Pin | Function |
| 1 | Chassis Ground/Screen |
| 2 | Input Phase/Positive |
| 3 | Input Non-Phase/Negative |
Balanced Line Output XLR Pinout | |
| Pin | Function |
| 1 | Chassis Ground/Screen |
| 2 | Output Phase/Positive |
| 3 | Output Non-Phase/Negative |
PoE Power | |
| Standard | 802.3af |
| Class | 0 |
| PD Power Range | 0.44 W to 12.94 W |
| Typical PSE Power Usage | 6.5 W |
| Max PSE Power Usage | 15.4 W |
Equipment Type | |
| AVN-AIO8: | 8 Input, 8 Input, 8 Output Dante® Interface, PoE |
Physical Specification | |
| Dimensions (Raw): | 48cm (W) x 11cm (D) x 4.3cm (H)(1U) |
| Dimensions (Raw): | 19” (W) x 4.3” (D) x 1.7” (H) |
| Weight: | Nett: 1.1kg Gross: 1.6kg |
| Weight: | Nett: 2.4lbs Gross: 3.5lbs |
SUPPORT
| AVN-AIO8 Handbook | [Download] | |
| The AVN Guide | [Download] |
Brochures
| Click to visit the brochures page. |
Declarations
| Click to visit the declarations page. |
| Dante Firmware - Zipped | Version | V4.2.4.2 | Date | 12/03/2021 | [Download] |
/aio8r-front-optimized.webp)
