Microphone Amplifiers

AVN-DIO09

Microphone Input to Dante®

Microphone input to Dante audio converter. It features a single, full-featured, high-quality mic preamp, plus a Neutrik EtherCon® connector for direct connection to a Dante AoIP network.

AES67_logo-optimized Dante_Logotype_Black-optimized DDMready_logo-optimized

About AVN-DIO09

At a Glance

The AVN-DIO09 is an ultra-high quality single microphone to Dante® interface from the Sonifex DIO range, featuring a balanced analogue XLR input with a high-performance mic preamp for seamless integration with Dante Audio-over-IP networks. It delivers A/D conversion with a world-class equivalent input noise (EIN) of -129dB.


Mic Gain, Filtering & Phantom Power

The microphone input includes coarse and fine gain adjustment, a switchable high-pass filter, phantom power, and a tri-colour level LED for accurate signal monitoring. Coarse gain is selectable between 14dB and 44dB via a front panel switch, while fine gain provides an additional 0dB to 42dB of adjustment.

The high-pass filter can be enabled to attenuate frequencies below 125Hz at 6dB per octave, and phantom power supplies 48V DC for compatible microphones, with a front panel LED indicating when it is active.


Networked Audio & Power

Audio and power are delivered via the EtherCON® connection, supporting PoE for simplified installation. The unit incorporates Audinate Dante chipsets and is compliant with AES67 and Dante Domain Manager.


Simple Installation & Mounting

Like all Sonifex DIO interfaces, it provides a simple plug-and-play solution for connecting analogue and digital audio equipment to Dante networks, with configuration handled via Dante Controller. It is housed in a rugged aluminium enclosure with provisions for desk mounting, and an optional accessory, AVN-DIORK, allows multiple units to be installed on a 19″ rack-mount shelf.

Typical Applications

To send any microphone signal to the Dante network, to amplify microphones in a studio talks area, court room microphone amplification, converting mic signal where mic and amp are a long distance apart.

Product Data

Technical Specifications

Microphone XLR Input Pin-out
Pin
Function
1
Chassis Ground
2
Input Phase
3
Input Non Phase
Earthing Point
Single earth tag.
Level LED Thresholds
Off
Level is under -38dBFS (-20dBu)
Green
Level is between -38dBFS (-20dBu) and -18dBFS (0dBu)
Amber
Level is between -18dBFS (0dBu) and -10dBFS (+8dBu)
Red
Level is above -10dBFS (+8dBu).
Microphone Input - XLR
Parameter
Description
Input Impedance
2.2kΩ balanced
Maximum Input Level
-68dBu (max gain) to -8dBu (min gain)
Gain
Adjustable 20dB to 86dB
Frequency Response
20Hz to 20kHz, +0/-0.5dB (ref 1kHz)
High Pass Filter Response
Fc = 125Hz @ 6dB per octave
THD+N
<0.01%, -32dBu input, 40dB gain, 20Hz to 20kHz, 20kHz BW
E.I.N.
-129dBu, 20kHz BW, max gain, Rs=200Ω
Common Mode Rejection
>60dB @ 1kHz
Phantom Power
+48V ± 4V
Dante
Parameter
Description
Sample Rates:
4.1kHz, 48kHz, 88.2kHz, 96kHz
Encoding:
PCM 16, PCM 24, PCM 32
PoE Power
Standard
802.3af
Class
0
PD Power Range
0.44 W to 12.94 W
Typical PSE Power Usage
4 W
Max PSE Power Usage
15.4 W
Equipment Type
AVN-DIO09:
Microphone Input to Dante®
Physical Specification
Dimensions: (Raw)
10.6cm (W) x 7.3cm (D) x 4.3cm (H)
Dimensions: (Raw)
4.2” (W) x 2.9” (D) x 1.7” (H)
Dimensions (Boxed):
17.4cm (W) x 9.5cm (D) x 5.6cm (H)
Dimensions (Boxed):
6.9” (W) x 3.7” (D) x 2.2” (H)
Weight:
Nett: 0.2kg Gross: 0.3kg
Weight:
Nett: 0.44lbs Gross: 0.66lbs

Downloads & Resources

Support

Handbooks & Guides

The AVN GuideDownload ↗
A4 AVN-DIO09 BLACK Handbook V1.04Download ↗

Firmware


Version Dante V4.2.9.10 · 08/12/2025
Download ↗

Firmware Notes

Full release notes for all firmware versions will appear here when available.

Brochures

Brochures, guides and supporting literature are available from the Sonifex brochures library.Visit brochures page ↗

Declarations

Access CE and UKCA declarations and other product compliance documentation.Visit declarations page ↗