Mix Consoles
S2-C6SS
6 Way Stereo Source Select Channel with EQ
The 6 way stereo line source select channel has 6 balanced stereo inputs on a 25 way D-type connector selectable by a 6 way mechanical interlocking switch bank, numbered 1 – 6.
About S2-C6SS
The 6 way stereo line source select channel has 6 balanced stereo inputs on a 25-way D-type connector, selectable by a 6-way mechanical interlocking switch bank, numbered 1 – 6. A depressed button indicates the selected input.
The switch bank also controls 6 sets of remote outputs, allowing each source to have a set of start/stop remotes. The remote starts can be set as momentary or latching. Continuous momentary start can also be enabled such that when the fader is up and the channel is on, each press of the ON button triggers a momentary start.
The channel is fitted with EQ as standard and other functions are similar to the S2-CSE Dual Stereo channel with EQ. The HF and LF controls are used to adjust the equalisation of the signal. The HF control boosts and cuts the signal by 10dB at 6.5kHz. The LF control boosts and cuts the signal by 10dB at 100Hz. The EQ button places the equalisation in and out of the signal path and is illuminated yellow when the EQ is active. The channel can be used to control either one of two separate timer displays.
Typical Applications
Community, student, hospital and small scale radio broadcast mixer, secondary or backup on-air mixer.Product Data
Technical Specifications
Input/Output Impedances
Input/Output Gain Range
Frequency Response
Noise (20Hz to 20kHz)
Distortion
Crosstalk
Equalisation
Range
Common Mode Rejection Ratio
Digital I/O
Output
Power
Downloads & Resources
Support
Handbooks & Guides
Firmware
No firmware currently listed.
Firmware Notes
Full release notes for all firmware versions will appear here when available.








