RAVENNA Embedding & De-Embedding
AVN-DIO10-RAV
RAVENNA to 3G/HD/SD-SDI Embedder/De-Embedder
The Sonifex AVN-DIO10-RAV is a professional RAVENNA/AES67 audio-over-IP to 3G/HD/SD-SDI embedder and de-embedder, supporting up to 16 channels of audio in each direction. Featuring flexible SDI operating modes, selective audio embedding, web-based configuration and redundant PoE power connections, it provides a versatile interface between SDI video and RAVENNA/AES67 audio networks.
About AVN-DIO10-RAV
At a Glance
The Sonifex AVN-DIO10-RAV is a professional RAVENNA/AES67 audio-over-IP to 3G/HD/SD-SDI embedder and de-embedder, designed to provide flexible audio integration between SDI video systems and RAVENNA/AES67 networks.
The unit supports simultaneous embedding and de-embedding of up to 16 audio channels in each direction, allowing audio to be transferred between an SDI signal and an AoIP network. Its compact design makes it suitable for broadcast facilities, television studios, live production and other professional environments where SDI and networked audio systems need to operate together.
All device configuration settings are accessible through the web interface, eliminating the need for physical DIP switches. A thermostatically controlled, silent cooling fan provides temperature-responsive cooling and enhanced heat dissipation.
Flexible SDI Operating Modes
The AVN-DIO10-RAV supports 3G, HD and SD-SDI video formats, providing flexible operation across a range of professional video systems.
The unit can operate in SDI loop-through mode, allowing the incoming SDI signal to pass through to the output while audio is embedded or de-embedded. An internal SDI video generator is also provided, enabling SDI output to be generated without an incoming video signal.
The generator supports SD, HD and 3G-SDI output formats, with selectable resolutions including 720 × 480 (SD NTSC), 720 × 576 (SD PAL), 1280 × 720 (HD) and 1920 × 1080 (Full HD).
These operating modes make the unit suitable for installations where audio needs to be inserted into or extracted from an existing SDI feed, as well as applications requiring a generated SDI signal.
Selective Audio Embedding & Insert Mode
The AVN-DIO10-RAV allows audio from the RAVENNA/AES67 network to be selectively embedded into the SDI output on a channel-pair basis.
Individual audio channel pairs can be enabled or disabled, giving users control over which network audio channels are embedded into the SDI signal.
Insert Mode provides additional flexibility by allowing existing embedded SDI audio to be selectively replaced or cleared within the enabled audio groups. This is particularly useful in broadcast workflows where some existing SDI audio channels need to be retained while others are replaced with audio from the network.
RAVENNA/AES67 Network Connectivity
The AVN-DIO10-RAV provides RAVENNA/AES67 audio-over-IP connectivity, allowing professional audio to be transported between compatible networked devices.
The RAVENNA implementation supports sample rates of 44.1, 48, 88.2, 96, 176.4 and 192 kHz, providing flexibility when integrating with different AoIP systems.
Primary and secondary network connections support RAVENNA multi-interface mode. The unit also features dual Power over Ethernet (PoE) redundancy, helping maintain power availability when connected to suitable PoE network infrastructure.
Audio routing and stream configuration can be managed using Merging Technologies’ ANEMAN network management software.
Sample Rate Conversion & Test Tones
The AVN-DIO10-RAV incorporates sample rate conversion to support audio transfer between the RAVENNA/AES67 network and the SDI audio system.
SDI embedded audio operates at 48 kHz, while the RAVENNA network supports a range of sample rates. Sample rate conversion allows audio to be transferred between systems operating at different rates without requiring the RAVENNA audio clock to synchronise to the incoming SDI signal.
Built-in test tone generation is provided for embedding and de-embedding, allowing signal paths to be checked during installation, configuration and fault-finding.
Web-Based Configuration
All device configuration settings are accessible through the AVN-DIO10-RAV web interface, removing the need for physical DIP switches.
The web interface provides control over SDI operating modes, audio embedding and de-embedding, Insert Mode, sample rate conversion options, test tones and other device settings.
This allows the unit to be configured and monitored remotely using a standard web browser.
Web Interface & Monitoring
The web interface provides access to device information, network configuration, operational status and firmware management.
The Device Information page also includes a direct link to the RAVENNA module’s configuration interface, providing convenient access to its network and audio settings.
This arrangement allows users to manage the AVN-DIO10-RAV’s SDI functionality through the device web interface while accessing the RAVENNA module configuration when required.
Reliable Cooling & Thermal Management
The AVN-DIO10-RAV incorporates a thermostatically controlled, silent cooling fan to support reliable operation.
The temperature-responsive fan adjusts its operation according to the unit’s thermal requirements, helping maintain suitable operating temperatures and providing enhanced heat dissipation.
Combined with its compact construction and redundant PoE power arrangement, the AVN-DIO10-RAV is designed for professional broadcast and audio installations.
Typical Applications
Broadcast studios and television production facilities requiring integration between SDI video and RAVENNA/AES67 audio networks. Live production and outside broadcast environments where network audio needs to be embedded into or de-embedded from SDI video signals. Broadcast infrastructure upgrades and hybrid installations combining traditional SDI equipment with RAVENNA/AES67 audio-over-IP systems. Audio routing and distribution applications requiring selective replacement of embedded SDI audio with network audio. System testing, installation and maintenance applications using internal SDI video generation and audio test tones.Product Data
Technical Specifications
Parameter SDI Input
Parameter SDI Output
Network and AoIP
PoE Power
Equipment Type
Physical Specification
Accessories
Downloads & Resources
Support
Handbooks & Guides
Firmware
No firmware currently listed.
Firmware Notes
Full release notes for all firmware versions will appear here when available.





