openGear
Please Note: This Product has been discontinued
OG-DDA8B openGear 8 Output Balanced Digital Audio Distribution.
OG-DDA8B openGear 8 Output Balanced Digital Audio Distribution
Amplifier, 2 Inputs
The OG-DDA8B digital distribution amplifier is used for distributing balanced digital audio, repeating both the audio data and the status information of the input whilst re-normalising to standard digital audio levels.
It has 2 selectable balanced digital audio inputs one of which is distributed to 8 balanced digital audio outputs (using Weco 3 pin connectors if the optional OG-R1-10A connector board is used).
Applications include distributing audio from a digital mixing desk to multiple digital recorders, or feeding multiple studios with an output from a DAT machine.
It can accept input sample rates in the range of 30kHz - 192kHz, and bit rates of 16, 20 and 24 bit. So, it can be used for standard CD signal distribution at 16 bit 44.1kHz, as well as for high quality 24 bit 192kHz recording.
Sonifex openGear boards are fully compatible with the Dashboard control software that allows you to monitor and change the board settings via an ethernet interface to the rack controller card.
Technical Specification For OG-DDA8B |
|
Audio Specification |
|
| Input Imped: | 110Ω ±20% balanced |
| Output Imped: | 110Ω ±20% balanced |
| Sample Freq Range: | 30-192kHz (i.e. including 32kHz, 44.1kHz, 48kHz, 64kHz, 88.2kHz, 96kHz, 176.4kHz & 192kHz) |
| Signal Level: | 3V/10V peak to peak min/max |
Equipment Type |
|
| OG-DDA8B: | 8 output balanced digital audio distribution amplifier, 2 inputs |
Physical Specifications |
|
| Dimensions (Raw): | 33.5cm (W) x 7.5cm (D) x 1.2cm (H) 13.2” (W) x 3” (D) x 0.5” (H) |
| Dimensions (Boxed): | 39cm (W) x 29cm (D) x 8.5cm (H) 15.4” (W) x 11.5” (D) x 3.4” (H) |
| Weight: | Nett: 0.15kg Gross: 0.4kg Nett: 0.3lb Gross: 0.9lb |
Accessories |
|
| OG-R1-10A: | openGear single rear module using balanced WECO 3 pin I/O |
