Category: Remote Control
SCi Software Control Interface
Used to remotely configure and control devices via RS-232 or TCP/IP; multiple devices can be connected simultaneously; and includes drivers to control DHY-03, DHY-03EC, RB-ADDA2 and RB-DS2 units.
|SCi|| SCi Software Control Interface
AVN-GPIO GPIO to LAN Transceiver (PTP, EMBER+ & UDP)
The AVN-GPIO converts GPIO (General Purpose Inputs & Outputs) to network commands (using EMBER+ and UDP) to control, and be controlled by, other equipment or software across a standard network. It has 10 configurable GPIO’s, 8 of which can be used for PTP timing based programming, together with a voltage free relay contact, allowing any legacy equipment with hardware GPIO to be controlled over a network.
For example, button presses can be converted to network commands, to act as inputs to PC software for event handling.
It uses IEEE1588-2008 PTPv2 to keep its hardware clock in sync with a PTP master, such as the Sonifex AVN-GMCS Grandmaster Clock, to achieve a sub 10ns synchronisation to the master reference. So the AVN-GPIO can be used to accurately timestamp input events and to trigger outputs at configured times. In a motor racing application, PTP enabled time inputs can be used to accurately record the time when cars pass the finish line with a nanosecond resolution.
The RB-IPE is a 1U rackmount unit designed to provide remote control of GPIO and analogue control voltages over an Ethernet network. Configured using a built-in web server, two units can control each other across an Ethernet network, or a single unit can be controlled via Ethernet commands and the web server interface. The unit can be used in any position where you need to remotely acquire GPO signals or remotely control equipment, for example controlling equipment at unmanned posts, outstations or transmitter sites.
Pro Audio Streamers
The Pro Audio Streamers are a range of three IP to audio and audio to IP streamers which have professional analogue and digital inputs and outputs. They allow audio
to be streamed around a building, wan or lan using IP audio and CAT5 cabling infrastructure.
|PS-SEND||Audio To IP Streaming Encoder
|PS-PLAY||IP To Audio Streaming Decoder||more >>|
|PS-AMP||IP To Speakers Streaming Decoder||more >>|