Category: Monitor Controllers
Reference Monitor Controllers
The new Reference Monitor Controllers are a range of 1U rack-mount audio production control units, for providing source selection, volume, DIM and CUT controls for external analogue monitors, together with light controls for the Sonifex SignalLED range of studio signs, or similar.
Each of the products has a light control section. This section has 3 buttons: Transmit (TX), STANDBY and Rehearse (REH). The TX and REH buttons control opto-isolated outputs on the rear panel remote connector, and these provide a direct control interface to the Sonifex SignalLED illuminated studio sign, allowing twin signs to be controlled individually.
The Standby button initiates a 2 minute countdown where the TX and REH buttons and their associated remote outputs flash alternately. After the 2 minutes has elapsed, the TX output remains on.
The remote port also has open-collector tally outputs for Transmit (TX), Rehearse (REH), as well as remote input control for the audio controls DIM and CUT, and the light controls TX, Standby and REH. There is also a +12 Volt source at 200mA maximum.
The TX, STANDBY and REH buttons can optionally be replaced if you want to use different buttons for other applications.
There are four Monitor Controller products.
What The Press Said:Radioworld, May 2010 >
|RM-MC1L|| Monitor Controller, Single Stereo Input
& Output With Light Control
|RM-MC4L||Monitor Controller, 4 Stereo Inputs,
1 Stereo Output With Light Control
|RM-MC51L||Monitor Controller, 5.1 Stereo Inputs
& Outputs With Light Control