Microphone Amplifiers

AVN-DIO12

Dual Microphone Input to Dante® with Mic Gain

The AVN-DIO12 is a dual microphone input to Dante® interface with adjustable mic gain. It provides the same functionality as two AVN-DIO09 (single mic-to-Dante) units within a single chassis, while delivering high-performance A/D conversion with a world-class equivalent input noise (EIN) of -129dB.

WEB_logo-optimized AES67_logo-optimized DDMready_logo-optimized Dante_Logotype_Black-optimized

About AVN-DIO12

At a Glance

The AVN-DIO12 is an ultra-high quality dual microphone to Dante® interface from the Sonifex DIO range, featuring two balanced analogue XLR inputs with high-performance mic preamps for seamless integration with Dante Audio-over-IP networks. It delivers A/D conversion with a world-class equivalent input noise (EIN) of -129dB.


Mic Gain, Filtering & Phantom Power

Each microphone input includes independent coarse and fine gain adjustment, a switchable high-pass filter, phantom power, and a tri-colour level LED for accurate signal monitoring. Coarse gain is selectable between 14dB and 44dB via front panel switches, while fine gain provides an additional 0dB to 42dB of adjustment per channel.

The high-pass filter can be enabled to attenuate frequencies below 125Hz at 6dB per octave, and phantom power supplies 48V DC for compatible microphones, with front panel LEDs indicating when phantom is active on each channel.


Networked Audio & Power

Audio and power are delivered via the EtherCON® connection, supporting PoE for simplified installation. The unit incorporates Audinate Dante chipsets and is compliant with AES67 and Dante Domain Manager.


Simple Installation & Mounting

Like all Sonifex DIO interfaces, it provides a simple plug-and-play solution for connecting analogue and digital audio equipment to Dante networks, with configuration handled via Dante Controller. It is housed in a rugged aluminium enclosure with provisions for desk mounting, and an optional accessory, AVN-DIORK, is available to install multiple units on a 19″ rack-mount shelf.

Typical Applications

To send microphone signals to the Dante network and to route a mic signal over a long distance. Small and compact for easy placement. Distribute mic feeds over CAT5/6, at events, stadiums, court room or studio talks area.

Product Data

Technical Specifications

Microphone XLR Input Pin-out
Pin
Function
1
Chassis Ground
2
Input Phase
3
Input Non Phase
Microphone Input - XLR
Input Impedance:
2.2kΩ balanced
Maximum Input Level:
-68dBu (max gain) to -8dBu (min gain)
Gain:
Adjustable 20dB to 86dB
Frequency Response:
20Hz to 20kHz, +0/-0.5dB (ref 1kHz)
High Pass Filter Response:
Fc = 125Hz @ 6dB per octave
THD+N:
<0.01%, -32dBu input, 40dB gain, 20Hz to 20kHz, 20kHz BW
E.I.N.:
-129dBu, 20kHz BW, max gain, Rs=200Ω
Common Mode Rejection:
>60dB @ 1kHz
Phantom Power:
+48V ± 4V
Network and AoIP
AoIP Standard:
Dante
Channels:
2 transmit
Flows:
2 transmit
Sample Rates:
44.1kHz, 48kHz, 88.2kHz, 96kHz
Encoding:
PCM 16, PCM 24, PCM 32
AES67 Support
Yes
Connectivity:
EtherCON (RJ45 compatible)
Speed:
100Mbps
Dante Domain Manager Ready:
Yes
Clock Source:
Internal (PTP Leader) or Network PTP Leader
PoE Power
Standard
802.3af
Class
0
PD Power Range
0.44 W to 12.94 W
Typical PSE Power Usage
TBD
Max PSE Power Usage
15.4 W
Equipment Type
AVN-DIO12:
Dual Microphone Input to Dante® with Mic Gain
Physical Specification
Dimensions (Raw):
14.0cm (W) x 13.6cm (D) x 4.2cm (H)
Dimensions (Raw):
5.5” (W) x 5.4” (D) x 1.7” (H)
Dimensions (Boxed):
17.8cm (W) x 17cm (D) x 5.6cm (H)
Dimensions (Boxed):
7.0” (W) x 6.7” (D) x 2.2” (H)
Weight:
Nett: 0.5kg Gross: 0.7kg
Weight:
Nett: 1.1lbs Gross: 1.4lbs

Downloads & Resources

Support

Handbooks & Guides

The AVN GuideDownload ↗
A4 AVN-DIO12 Handbook V1.02Download ↗

Firmware


Version Dante V4.2.9.10 · 08/12/2025
Download ↗

Firmware Notes

Full release notes for all firmware versions will appear here when available.

Brochures

Brochures, guides and supporting literature are available from the Sonifex brochures library.Visit brochures page ↗

Declarations

Access CE and UKCA declarations and other product compliance documentation.Visit declarations page ↗