Dante Embedding & De-Embedding

AVN-DIO10

Dante® to 3G/HD/SD-SDI Embedder/De-Embedder

The AVN-DIO10 can be used for simultaneous embedding and de-embedding. This simple plug and play audio/video interface provides a convenient and elegant method of connecting legacy 3G/HD/SD-SDI equipment to the Dante® AoIP audio network.

WEB_logo-optimized AES67_logo-optimized Dante_Logotype_Black-optimized DDMready_logo-optimized

About AVN-DIO10

The easiest way to connect legacy SDI equipment to the Dante® network, the AVN-DIO10 adds support for from SD-SDI up to 3G-SDI. It performs simultaneous embedding and de-embedding of up to 16 audio channels, providing a simple plug-and-play audio/video interface for connecting 3G/HD/SD-SDI equipment to a Dante® AoIP audio network.

The unit de-embeds up to 16 audio channels from an SDI feed and places them on Dante channels 1–16 (configured via Dante Controller). At the same time, it takes the 16 Dante input channels mapped to the device and re-embeds them onto the SDI output.

Two operating modes are available: Loop-through mode, where the SDI input is passed directly to the output, and Generator mode, where input and output are independent and the SDI output is supplied by an internal SDI video generator. Generator mode allows the unit to act as an embedder without an SDI feed, or as separate de-embedder and embedder with different input/output formats. All settings are configurable through the web UI.

The unit supports embedded audio at 48 kHz and 96 kHz, allowing different sample rates on the de-embed and embed paths. At 96 kHz, SDI channel capacity is halved, with each audio group carrying two channels rather than four at 48 kHz.

The web UI allows Dante channels to be embedded onto the SDI output on a per-channel-pair basis and offers two options: Insert Mode enabled, where embedding selectively overwrites existing SDI audio per channel pair, and Insert Mode disabled, where incoming SDI audio channels are cleared before selective embedding is applied.

Test Tone mode outputs 1 kHz, 2 kHz, 3 kHz and 4 kHz tones on channels 1–4 respectively for any group with embedding enabled. A separate de-embedder test mode places a 1 kHz tone on the transmitting Dante® channels, enabling downstream SDI audio I/O testing without Dante® or SDI sources.

Power is provided via Power over Ethernet (PoE) using Neutrik® EtherCON connectors, with primary and secondary ports for power and data redundancy. Front panel LEDs indicate network clock status, AoIP link activity, and PoE power presence for clear operational monitoring. The unit incorporates Audinate Dante chipsets and is compliant with AES67 and Dante Domain Manager.

Like all Sonifex DIO interfaces, it provides a simple plug-and-play solution for connecting analogue and digital audio equipment to Dante networks, with configuration handled via Dante Controller. It is housed in a rugged aluminium enclosure with provisions for desk mounting, and an optional accessory, AVN-DIORK, allows multiple units to be installed on a 19″ rack-mount shelf.

Typical Applications

Taking audio embedded on an SDI camera feed, or any legacy SDI feed, and de-embedding it to the Dante network, adding Dante audio feeds to an SDI signal for distribution around a facility. Houses of worship - embed multi-language services for distribution. De-embed audio from live HD football feeds to provide multi-language radio commentaries, de-embed audio to pass to a Dante based speaker system. Embed remixed 5.1 + stereo music onto HD concert footage.

Product Data

Technical Specifications

Parameter SDI Input
Input Impedance:
75Ω Unbalanced
SDI Supported Standards:
270Mbps SMPTE-259M-C (SD)
1.485 or 1.4835Gbps SMPTE-292M (HD)
2.97 or 2.967Gbps SMPTE-424M (3G)
525/59.94 (SMPTE-125M)
625/50 (ITU-R BT.656)
720p/23.98, 24, 25, 29.97, 30, 50, 59.94, 60 (SMPTE-296M)
1035i/59.94, 60 (SMPTE-260M)
1080i/50, 59.94, 60 (SMPTE-274M)
1080p/23.98, 24, 25, 50, 59.94, 60 (SMPTE-274M)
1080pSF/23.98, 24, 25, 29.97, 30 (RP-211)
1080i/50 (SMPTE-295M)
1080p/50 (SMPTE-295M)
Embedded Audio:
48kHz, synchronous
SMPTE-272M-ABC
SMPTE-299M
Supported Image Mapping:
SMPTE-425M-AB
Parameter SDI Output
Output Impedance:
75Ω Unbalanced
Alignment Jitter:
<0.2UI
Output Level:
800mV ±10%
Return Loss:
<15dB @ 1.5GHz
SDI Supported Standards:
Output follows input
Supported Video Formats:
Output follows input
Embedded Audio:
48kHz, synchronous
SMPTE-272M-C
SMPTE-299M
Network and AoIP
AoIP Standard
Dante
Channels
16 receive, 16 transmit
Flows
16 receive, 16 transmit
Sample Rates
44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
Encoding
PCM 16, PCM 24, PCM 32
Connectivity
2 x etherCON (RJ45 compatible)
Speed
1Gbps or 100Mbps
Network Modes
Switched or redundant
AES67 Support
Yes
Dante Domain Manager Ready
Yes
Clock Source
Internal (PTP Leader), Network PTP Leader or from SDI input (Sync to External)
PoE Power
Standard
802.3af
Redundancy
Yes
Class
0
PD Power Range
0.44 W to 12.94 W
Typical PSE Power Usage
6 W
Max PSE Usage
15.4 W
Equipment Type
AVN-DIO10:
Dante to 3G/HD/SD-SDI Embedder/De-Embedder
Physical Specification
Dimensions (Raw):
14.0cm (W) x 13.6cm (D) x 4.2cm (H)
Weight:
Nett: 0.3kg Gross: 0.5kg
Accessories
AVN-DIORK
AVN-DIO 1U 19" Rack Kit (5 x Small DIO or 3 x Large DIO)

Downloads & Resources

Support

Handbooks & Guides

The AVN GuideDownload ↗
AVN-DIO10 HandbookDownload ↗

Firmware

Service Discovery (find device IP addresses on your local network)
Download ↗
AVN-DIO10
Version 2.4.394 (Includes V1.7.292) · 01/10/2026
Download ↗

Firmware Notes

Full release notes for all firmware versionsDownload ↗

Brochures

Brochures, guides and supporting literature are available from the Sonifex brochures library.Visit brochures page ↗

Declarations

Access CE and UKCA declarations and other product compliance documentation.Visit declarations page ↗