Mix Consoles
S2-CDS
S2-CDS Digital Dual Stereo Channel
The digital dual stereo channel has two 24-bit 96kHz digital inputs with an INP 1/INP 2 button switch to select between them.
About S2-CDS
The digital dual stereo channel has two 24-bit 96kHz digital inputs with an INP 1/INP 2 button switch to select between them. The button is illuminated in red to indicate when Input 2 is selected. The operation of the button is inhibited when the channel is “live”.
Either input can be configured to be balanced AES/EBU on standard XLR, or S/PDIF on phono sockets, selected by internal jumpers. An additional jumper option can be used to decode emphasis when indicated by certain status bits in the incoming data stream. The digital signals are converted to analogue, and from this point the channel functions are the same as the S2-CS Dual Stereo Line channel with the addition that when the ON button flashes green, it means that there is no valid digital input.
Both S2-CDS and S2-CDSE channels can be used to control either one of two separate timer displays.
Typical Applications
Community, student, hospital and small scale radio broadcast mixer, secondary or backup on-air mixer.Product Data
Technical Specifications
Input/Output Impedances
Input/Output Gain Range
Frequency Response
Noise (20Hz to 20kHz)
Distortion
Crosstalk
Equalisation
Range
Common Mode Rejection Ratio
Digital I/O
Output
Power
Downloads & Resources
Support
Handbooks & Guides
Firmware
Download ↗
Firmware Notes
Full release notes for all firmware versions will appear here when available.








