AVN-TB20AR
20 Button Advanced Talkback Intercom, AoIP Portal
The AVN-TB20AR is a 2U rackmount 20 button version of the AVN-TB10AR with the same specification, but more station buttons allowing greater communication for larger facilities.
AVN-TB20AR
20 Button Advanced Talkback Intercom, AoIP Portal
The AVN-TB20AR is a 2U rackmount 20 button version of the AVN-TB10AR with the same specification, but more station buttons allowing greater communication for larger facilities. It also has ‘GPI/O’ and ‘Phone’ buttons for remote control of external equipment and Sonifex DHY-04 telephone hybrids, useful in an OB truck or production gallery.
Product Features
20 illuminated key-cap Talk buttons plus Listen & Page buttons.
Phone button for remote dialling and control of an external telephone hybrid.
Page button and Group Talk facilities.
Callback button with callback source display.
Three user definable buttons.
Speaker & microphone mute buttons.
Mic & headset inputs (front & rear panel headset connection), headphone & speaker outputs.
Front panel volume control which operates on speaker/headphone outputs and incoming source levels.
+48V phantom power for the mic inputs.
Ethernet webserver and front panel control & configuration.
Front panel display providing source & destination information.
Sources from AoIP, 1 x balanced, 2 x unbalanced or S/PDIF digital inputs.
Destinations to AoIP or rear panel balanced & unbalanced outputs.
Advanced echo cancellation & mic AGC to prevent acoustic feedback.
Dual 1Gb lan ports & 1Gb SFP fibre port.
10 user assignable GPIO ports.
GPI/O button for triggering external events, via physical GPIO or network commands.
Front panel LEDs for network audio presence, Talk activity, AGC activity, clock sync and power supply activity.
Two front panel monitor buttons for routing audio directly to the speaker e.g. to take an IFB feed or off-air transmission signal.
Ducking or mixing of inputs to speaker/headphones.
Dual AC & DC power supply inputs.
Typical Applications
Product Category
Talkback, Intercom & ControlTECHNICAL SPECIFICATIONS
Audio-Over-IP Specification | |
|---|---|
| Open Standards: | RAVENNA, AES67 |
| Device Discovery: | Bonjour (mDNS / DNS-SD) |
| Audio Delivery: | RTP/UDP over IPv4 multicast |
| QoS: | DiffServ |
| Stream Management: | RTSP/SDP |
| Control: | Ember+/webserver |
| Format: | Linear PCM 24-bit (L24) |
| Channels Per Stream: | 2 |
| Frames Per Packet: | 48 |
| Maximum Streams: | RX 6, TX 5 (fixed) |
| Sample Rate: | 48 kHz |
Timing Synchronisation | |
| Profile Support: | Default, media & custom profiles |
| Timing Protocol: | PTPv2, IEEE1588-2008 |
Technical Specification | |
Microphone and Headset Input | |
| Input Impedance: | >2.5kΩ balanced |
| Gain Range: | 0dB to +60dB |
| 0dBFS Line-Up: | Adjustable in steps of 3dB from -58dBu to +2dBu |
| Frequency Response: | 20Hz to 20kHz, +0/-0.2dB |
| Noise: | -127dBu, 20kHz BW, Rs=200Ω ref. 76dB gain |
Unbalanced Line Inputs | |
| Input Impedance: | >20kΩ |
| 0dBFS Line-Up: | +12dBu |
| Frequency Response: | 20Hz to 20kHz, +0/-0.2dB |
| THD+N: | <-97dBFS, -30dBFS, 20Hz to 20kHz, unity gain, 20kHz BW |
| Noise: | -100dBFS, 20kHz BW, Rs=200Ω |
| Crosstalk: | <-97dB |
Balanced Line Inputs | |
| Input Impedance: | >20kΩ balanced |
| 0dBFS Line-Up: | Adjustable +15/+18/+20/+22/ +24dBu |
| Frequency Response: | 20Hz to 20kHz, +0/-0.2dB |
| THD+N: | <-110dBFS, -30dBFS, 20Hz to 20kHz, 20kHz BW |
| Noise: | -110dBFS, 20kHz BW, Rs=200Ω |
| Crosstalk: | <-100dB |
| Common Mode Rejection: | >70dB @ 1kHz |
Headphone Output | |
| Output Impedance: | Drives 150mW into 32Ω to 600Ω headphones |
| 0dBFS Line-Up: | +20dBu |
| Frequency Response: | 20Hz to 20kHz, +0/-0.2dB |
| THD+N: | <-108dBFS, -30dBFS, 20Hz to 20kHz, unity gain, 20kHz BW |
| Noise: | -110dBFS, 20kHz BW |
Unbalanced Line Outputs | |
| Output Impedance: | <50Ω |
| 0dBFS Line-Up: | +12dBu |
| Frequency Response: | 20Hz to 20kHz, +0/-0.2dB |
| THD+N: | <-95dBFS, -30dBFS, 20Hz to 20kHz, unity gain, 20kHz BW |
| Noise: | -100dBFS, 20kHz BW |
Balanced Line Outputs | |
| Output Impedance: | <50Ω balanced |
| 0dBFS Line-Up: | Adjustable +15/+18/+20/+22/ +24dBu |
| Frequency Response: | 20Hz to 20kHz, +0/-0.2dB |
| THD+N: | <-110dBFS, -30dBFS, 20Hz to 20kHz, 20kHz BW |
| Noise: | -110dBFS, 20kHz BW, Rs=200Ω |
Loudspeaker | |
| Power Output: | 4W |
| Volume: | Mute to full volume via front panel control |
Connections | |
| Microphone: | XLR-3 pin female (electronically balanced) |
| Headphone: | ¼ inch (6.35mm) stereo jack socket |
| Headset: | 2 x XLR-5 pin female (front/rear electronically balanced input) |
| Audio Inputs: | 2 x unbalanced stereo, RCA phono |
| Audio Inputs: | 1 x S/PDIF, RCA phono |
| Audio Outputs: | 1 x balanced stereo, RJ45 |
| Audio Outputs: | 1 x unbalanced stereo, 2 x RCA phono |
| Audio Outputs: | 1 x loudspeaker output |
| Audio Input/Output: | 1 x balanced stereo input or mono input/output, RJ45 |
| GPIO: | 15-way ‘D’-type socket |
| Network: | 2 x gigabit Ethernet, RJ45 |
| Network: | 1 x SFP fibre |
| Mains AC Input: | Universal filtered IEC, continuously rated 85-264VAC, 47-63Hz, 20W |
| DC Input: | 4 pin 7.5A power jack socket, 9.5-14VDC |
| Fuse Rating: | Anti-surge fuse 2A 20mm x 5mm |
Equipment Type | |
| AVN-TB20AR | 20 channel rackmount talkback intercom control unit with RAVENNA AoIP |
Physical Specification | |
| Dimensions: (Raw) | 48.3cm (W) x 17.5cm (D) x 8.8cm (H)(2U) |
| Dimensions: (Raw) | 19” (W) x 6.9” (D) x 3.6” (H) (2U) |
| Dimensions (Boxed): | 59cm (W) x 28cm (D) x 15cm (H) |
| Dimensions (Boxed): | 23” (W) x 11” (D) x 5.9” (H) |
| Weight: | Nett: 3.7kg Gross: 4.4kg |
| Weight: | Nett: 8.1lbs Gross: 9.7lbs |
Accessories | |
| AVN-DC150 | 150W DC power supply with KPJX-4S plug |
| CM-GM2: | Professional Gooseneck Condenser Microphone |
SUPPORT
| AVN-TB20AR Handbook | [Download] | |
| The AVN Guide | [Download] |
Brochures
| Click to visit the brochures page. |
Declarations
| Click to visit the declarations page. |
| Firmware - Zipped | Version | V1.3.1437 | Date | 26/09/2018 | [Download] |
| AVN-TB20AR Firmware Notes | [Download] |
