Audio Interfaces
What The Press Said:
Pro Audio Asia, Jan-Feb 2012 >
The Redbox Range of Products
Manufactured to the highest standards in our UK offices, utilisation of the finest components and critical quality control techniques ensure that your Redboxes will work every time for years to come.
Each Redbox is tested twice by skilled audio engineers, before being carefully assembled and packed. The Redbox range of products are “fit and forget” because you can set them up, fit them in your installation and then forget about them - they won’t trouble you.
Features
Features of the Redbox range :
- All are equipped with IEC mains lead and instruction manual.
- In-house design and manufacture ensures high quality control standards.
- All units are 115V 60Hz or 230V 50Hz switchable and all have a front panel LED power indicator.
- Manufactured within ISO9000 standards and guaranteed CE compliant.
- Housed in eye catching red anodised aluminium cases.
Digital Audio Converters |
||||
| RB-ADDA | Combined A/D and D/A Converter | more >> | ||
| RB-ADDA2 | Combined A/D and D/A Converter, 24bit 192kHz | more >> | ||
| RB-SC1 | Sample Rate Converter | more >> | ||
| RB-SC2 | Dual Sample Rate Converter, 24bit 192kHz | more >> | ||
| RB-DAC1 | Digital to Analogue Converter | more >> | ||
| RB-SP1 | Digital Splitter and Combiner | more >> | ||
| Back to Redbox Contents > |
||||
Synchronisation Add-On Boards |
||||
| RB-SYA | Analogue Video Sync Add-On Board | more >> | ||
| RB-SYD | Digital Video Sync Add-On Board | more >> | ||
| RB-SYE | AES/EBU Sync Board | more >> | ||
| RB-SYW | Word Clock Sync Board | more >> | ||
| Back to Redbox Contents > |
||||
Synchronisers, Delays & Silence Detectors |
||||
| RB-DS2 | Stereo Delay Synchroniser & Time-Zone Delay | more >> | ||
| RB-DS2R | Remote Switch Panel For RB-DS2. | more >> | ||
| RB-PD2 | Stereo Profanity Delay | more >> | ||
| RB-DD4 | 4 Channel Digital Audio Delay |
more >> | ||
| RB-SD1 | Silence Detect Unit | more >> | ||
| RB-DSD1 | Digital Silence Detect Unit | more >> | ||
| RB-DSD8 | 8 Channel Silence Switcher | more >> | ||
| Back to Redbox Contents > |
||||
Matching Converters |
||||
| RB-UL1 | Unbalanced to Balanced Single Converter | more >> | ||
| RB-UL2 | Dual Unbalanced to Balanced Converter | more >> | ||
| RB-UL4 | Quad Unbalanced to Balanced Converter | more >> | ||
| RB-LU4 | Quad Stereo Balanced to Unbalanced Converter | more >> | ||
| RB-BL2 | Unbalanced to Balanced Bi-Directional Converter | more >> | ||
| RB-BL4 | Dual Stereo Bi-Directional Matching Amplifier | more >> | ||
| RB-PA2 | Dual Stereo RIAA Phono Amplifier | more >> | ||
| RB-LI2 | Stereo Line Isolation Unit | more >> | ||
| RB-PLI6 | 6 Way Mono Passive Line Isolation Unit | more >> | ||
| Back to Redbox Contents > |
||||
Audio Distribution Amplifiers |
||||
| RB-DA6 | 6 Way Stereo Distribution Amplifier | more >> | ||
| RB-DA6G | 6 Way Stereo Distribution Amplifier With Output Gain Control | more >> | ||
| RB-DA6P | 6 Way Syereo Distribution Amplifier With Phoenix Connectors | more >> | ||
| RB-DA6R | 6 Way Stereo Distribution Amplifier With RJ45 Connectors | more >> | ||
| RB-DA6RG | 6 Way Stereo Distribution Amplifier With RJ45 Connectors & Output Gain Control |
more >> | ||
| RB-DA4x5 | 4 Input, 4 x 5 Output Distribution Amplifier/Mixer | more >> | ||
| RB-DDA6A | 6 Way AES/EBU Digital Distribution Amplifier | more >> | ||
| RB-DDA6A-2P | 6 Way Stereo AES/EBU Digital Distribution Amplifier with Dual Power Supplies | more >> | ||
| RB-DDA6S | 6 Way S/PDIF Digital Distribution Amplifier | more >> | ||
| RB-DDA6W | 6 Way Word Clock Distribution Amplifier | more >> | ||
| RB-DDA22 | Digital Audio Distribution Amplifier With Multiple Outputs | more >> | ||
| Back to Redbox Contents > |
||||
Headphone Distribution Amplifiers |
||||
| RB-HD1 | Stereo Headphone Amplifier | more >> | ||
| RB-HD2 | Dual Stereo Headphone Amplifier | more >> | ||
| RB-HD6 | 6 Way Headphone Distribution Amplifier | more >> | ||
| RB-DHD6 | Digital 6-Way Headphone Distribution Amplifier | more >> | ||
| Back to Redbox Contents > |
||||
Mixers, Source Selectors & Switchers |
||||
| RB-SS10 | 10 Way Stereo Analogue Source Selector/Mixer | more >> | ||
| RB-DSS10 | 10 Way Stereo Digital Source Selector | more >> | ||
| RB-PMX4 | 10 Input, 4 Output Analogue Preset Mixer | more >> | ||
| RB-DMX4 | 4 x 4 Channel Digital Audio Mixer/Router |
more >> | ||
| RB-SSML1 | Mic/Line Source Selector with Compressor/Limiter | more >> | ||
| RB-OA3 | 3 Studio On-Air Switcher | more >> | ||
| RB-OA3R | Remote Switch Panel For RB-OA3 | more >> | ||
| RB-OA3C | Expansion Unit Cable Kit For The RB-OA3 | more >> | ||
| Back to Redbox Contents > |
||||
Microphone Amplifiers & Limiters |
||||
| RB-MA1 | Single Microphone Amplifier | more >> | ||
| RB-MA2 | Dual Microphone Amplifier | more >> | ||
| RB-DMA2 | Dual Digital Microphone Amplifier | more >> | ||
| RB-ML2 | Microphone and Line Level Limiter | more >> | ||
| RB-SL2 | Twin Mono, or Stereo, Limiter | more >> | ||
| Back to Redbox Contents > |
||||
Stereo To Mono Converters |
||||
| RB-SM1 | Single Stereo to Mono Converter | more >> | ||
| RB-SM2 | Dual Stereo to Mono Converter | more >> | ||
| Back to Redbox Contents > |
||||
Power Controllers |
||||
| RB-LC3 | 3 Way Light/Power Controller | more >> | ||
Back to Redbox Contents >Talkback & Communications |
||||
| RB-MM1 | Mix-Minus Generator | more >> | ||
| RB-MTV1 | Voiceover Monitor with Talkback | more >> | ||
| RB-IPE | IP Extender for GPIO & Analogue Control Signals | more >> | ||
Back to Redbox Contents >Tone Generators |
||||
| RB-TGHDB | Multi-channel HD tone generator with BNC outputs | more >> | ||
| RB-TGHDX | Multi-channel HD tone generator with XLR outputs | more >> | ||
Back to Redbox Contents >Encoders & Decoders |
||||
| RB-DEED8 | Dolby® E Encoder 8 Channel, Digital Inputs | more >> | ||
| RB-DEDD8 | Dolby® E & Dolby Digital Decoder 8 Channel, Digital Outputs | more >> | ||
Back to Redbox Contents >Video Distribution Amplifiers |
||||
| RB-VHDA8 | HD/SD-SDI 1 Input 8 Output Video Distribution Amplifier | more >> | ||
Back to Redbox Contents >
Video Embedders & De-Embedders |
||||
| RB-VHDMA8 | 3G/HD/SD-SDI De-Embedder, 8 Channel Analogue Outputs | more >> | ||
| RB-VHEMA8 | 3G/HD/SD-SDI Embedder, 8 Channel Analogue Inputs | more >> | ||
| RB-VHCMA4 | 3G/HD/SD-SDI Embedder & De-Embedder, 4 Channel Analogue I/O |
more >> | ||
| RB-VHCMD16 | 3G/HD/SD-SDI Embedder & De-Embedder, 16 Channel Digital I/O |
more >> | ||
| RB-VHDDD8 | 3G/HD/SD-SDI De-Embedder Dolby® E & Dolby Digital Decoder & Re-Embedder |
more >> | ||
| RB-VHEDD8 | 3G/HD/SD-SDI De-Embedder, Dolby® E Encoder & Re-Embedder |
more >> | ||
Back to Redbox Contents >Accessories |
||||
| RB-RK1 | Front Panel Rack Mount Kit for small Redbox | more >> | ||
| RB-RK2 | Rear Panel Rack Mount Kit for small Redbox | more >> | ||
| RB-RK3 | Rear Panel Rack Mount Kit for large Redbox | more >> | ||
| RB-FR1 | Front Panel Kit for large Redbox | more >> | ||
| RB-FR2 | Front Panel Kit for RB-DAC1, RB-HD1 | more >> | ||
| RB-FR3 | Front Panel Kit for RB-HD2 | more >> | ||
| All the Redboxes are screw mountable as standard and are either rack-mounted or have the option to be rack-mounted.
The RB-RK rack mount kits can be attached to the front or the rear of the Redbox products so that they can be rack mounted into a standard 19 inch rack frame in 1U of space. Back to Redbox Contents > |
||||
| Wherever you see this symbol an RB-RK1 rackmount kit can be used. | ||||
| Wherever you see this symbol an RB-RK2 small Redbox rear panel rack ears can be used. | ||||
| Wherever you see this symbol an RB-RK3 large Redbox rear panel rack ears can be used. | ||||
| Wherever you see this symbol an RB-FR1 panel kit can be used. | ||||
| Wherever you see this symbol an RB-FR2 panel kit can be used. | ||||
| Wherever you see this symbol an RB-FR3 panel kit can be used. | ||||
| When ordering a Redbox from Sonifex it is helpful if you can specify your required operating voltage. After the product code add:- |
||||
| UK for 230V, UK 3 pin to IEC lead. | ||||
| EU for 230V, EEC Schuko 2 pin to IEC lead. | ||||
| US for 115V, US 3 pin to IEC lead. | ||||
| AU for 230V, Australasian 3 pin to IEC lead. | ||||
| Back to Redbox Contents > | ||||