Category: Sonifex Accessories
Contents |
| Redbox Products > |
| Hybrid Products > |
Redbox Products
Manufactured to the highest standards in our UK offices, utilisation of the finest components and critical quality control techniques ensure that your Redboxes will work every time for years to come.
 |
||||
Redbox Accessories |
||||
| RB-RK1 |  |
Front Panel Rack Mount Kit for small Redbox | more >> |  |
| RB-RK2 |  |
Rear Panel Rack Mount Kit for small Redbox | more >> |  |
| RB-RK3 |  |
Rear Panel Rack Mount Kit for large Redbox | more >> |  |
| RB-FR1 |  |
Front Panel Kit for large Redbox | more >> |  |
| RB-FR2 |  |
Front Panel Kit for RB-DAC1, RB-HD1 | more >> |  |
| RB-FR3 |  |
Front Panel Kit for RB-HD2 | more >> |  |
| All the Redboxes are screw mountable as standard and are either rack-mounted or have the option to be rack-mounted. The RB-RK rack mount kits can be attached to the front or the rear of the Redbox products so that they can be rack mounted into a standard 19 inch rack frame in 1U of space. | ||||
|
Wherever you see this symbol an RB-RK1 rackmount kit can be used. | |||
|
Wherever you see this symbol an RB-RK2 small Redbox rear panel rack ears can be used. | |||
|
Wherever you see this symbol an RB-RK3 large Redbox rear panel rack ears can be used. | |||
|
Wherever you see this symbol an RB-FR1 panel kit can be used. | |||
|
Wherever you see this symbol an RB-FR2 panel kit can be used. | |||
|
Wherever you see this symbol an RB-FR3 panel kit can be used. | |||
| When ordering a Redbox from Sonifex it is helpful if you can specify your required operating voltage. After the product code add:- |
||||
 |
UK for 230V, UK 3 pin to IEC lead. | |||
 |
EU for 230V, EEC Schuko 2 pin to IEC lead. | |||
 |
US for 115V, US 3 pin to IEC lead. | |||
 |
AU for 230V, Australasian 3 pin to IEC lead. | |||
| Back to Contents > | ||||
Telephone Hybrid Products
Telephone hybrids, or telephone balance units (TBUs) provide the interface between professional audio equipment and the public telephone network. They provide protection for your equipment and the public telephone lines, allowing for varying line signals and line conditions. Automatically cancelling out the unwanted signal they also facilitate two-way communication down a single telephone line.
 |
|||
Telephone Hybrid Accessories |
|||
Analogue |
|||
| HY-03DTD | Dial Tone Detect Add-on Board | more >> |  |
| HY-03CON | Front Panel Conversion Kit, HY-03S to HY-03 | more >> |  |
| HY-03SCON | Front Panel Conversion Kit, HY-03 to HY-03S | more >> |  |
| HY-03TCON | Front Panel Conversion Kit, HY-03 or HY-03S to HY-03T | more >> |  |
Digital |
|||
| DHY-03CON | Front Panel Conversion Kit, DHY-03S To DHY-03 | more >> |  |
| DHY-03SCON | Front Panel Conversion Kit, DHY-03 To DHY-03S | more >> |  |
| DHY-03TCON | Front Panel Conversion Kit, DHY-03 Or DHY-03S To DHY-03T |
more >> |  |
| DHY-03CONF | Conference Cable To Connect 2 x DHY-03 Units | more >> |  |
| DHY-03RLY | Latching Handset Relay Option For DHY-03, S and T |
more >> |  |
| Back to Contents > | |||
