Sonifex Software
RB-SD1IP Firmware Versions
V1.27
- Fixed - A problem caused by the optimisation of the USB stack.
V1.26
- Added - An option to select the front panel source control operation. This can be 'Normal' or 'Force to B (Aux)', selecting 'Force to B (Aux)' forces stereo input B to be routed to the outputs when the source control button is pressed.
V1.24
- Added - "Aux Input in Use" remote start trigger option.
- Added - The ability to configure the remote source indication.
- Added - Password protection to web server connections.
- Added - The ability to configure the HTTP port number.
- Added - The ability to switch sources through the web servers interface.
- Added - A warning to the device information web page which notifies the user when network link speed is incorrect.
V1.21
- User configurable Override time / Max Time from the web page (pins 1 and 14 on remote connector). It's possible to set any time between 1 Second and 24 hours
- The Remote Alarms can be inverted using a tick box on the web page
V1.17
- Bug fix for incorrect indication under certain circumstances
V1.14
- Bug fix for relay 2 engage on both B alarms
V1.13
- Bug fix for remote trigger fetch value
V1.12
- Added support for playlists in .txt and .m3u format (not extended m3u)
- Updated Webpage to match new style
- Selective optimisation
V1.11
- Improved clarity and layout of Web GUI
- Fixed Source Select Indicator bug
- Fixed SNMP Source Select change bug
- Added forceOutput configuration to MIB
- Added individual OID for each SNMP trap
V1.10
- Fixed bug in the SNMP reporting of the Output Status, with regard to Main and Auxiliary input sources
V1.09
- Improved user interface of Webserver
- Added / Enabled SNMP traps for GPI and Output Changeover
- Added an Output Source Indication option to use the source LED as an output signal indicator
- Added an Auto Lock option to prevent changing of the Main audio source away from input A when in Auto mode
- Added several options to the Remote Settings webpage to allow the use of specific physical inputs as triggers
- Added a Power On Auto setting which allows the user to enforce certain options every time the unit is booted
- Added latching functionality to the remote source select pin which can now force routing of input B
- Added SNMP Set functionality for multiple new options (see MIB)
- Added variable bindings to SNMP Traps
- Enabled LED brightness control
- Enabled USB functionality
- Added Track Recall option
- Added Default Sample Rate setting
- Fixed audio distortion on USB playback
- Added support for mutliple new sample rates: 8kHz, 11.025kHz, 12kHz, 16kHz, 22.05kHz, 24kHz, 32kHz, 44.1kHz and 48kHz
V1.04
- Initial release.
