Sonifex Has A Bright Idea For NAB 2009
5th February 2009
Being shown at stand N3217 of the NAB show are the SignalLED range of illuminated studio signs.
Designed for studio installers and systems integrators, these elegant RGB LED signs contain the control electronics themselves so that they can be simply configured for colour and operation on site.
The signs are flush mounted as standard but an optional kit can be used to end-mount them to the wall. There is also a double-sided end-mounted version which can be used, for example, in corridors, so that different wording is displayed on each side of the sign, or the same wording in a different orientation on each side.
Each sign is 40cm or 20cm long. The 40cm signs can be split into two 20cm sides which can be separately, or jointly controlled, e.g. a 40cm ‘ON AIR’ sign, or twin 2 x 20cm signs, such as ‘ON AIR’ and ‘MIC LIVE’. There is a wide range of different lettering available and the colours of the signs can be chosen from white, green, red, blue, yellow, orange, cyan and magenta. The signs can be installed and then configured for operation using accessible DIP switches.
Display modes available are: to be on constantly, to flash, to pulse, or to switch off using two control pull-low inputs which can control the whole sign, or either side of the sign. Each sign is supplied with a 6V DC power supply with international mains fitments and a 5m cable.
Although a range of standard signs is supported, custom signs, for example with your company name, company logo, or studio name, can be produced for a nominal setup fee.
For further images click here >
Contact email@example.com for further information.
UK and other export enquiries :
contact Eamonn Heffernan of Sonifex Ltd, tel : +44 1933 650 700 fax : +44 1933 650 726
email : firstname.lastname@example.org