Digital RAVENNA Converters

AVN-AESIO8-RAV

8 AES3 Input, 8 AES3 Output RAVENNA/AES67 Interface with XLR Connectivity

The AVN-AESIO8-RAV converts up to 8 channels of AES3 in and 8 channels of AES3 out to and from the RAVENNA/AES67 network, with full power and data redundancy.

About AVN-AESIO8-RAV

Designed for broadcast, live production, and professional AV environments, the AVN-AESIO8-RAV provides a cost-effective and dependable solution for transporting low-latency audio between AES3 and RAVENNA/AES67 network domains. 

The unit incorporates dual RJ45 1Gb/s Ethernet ports that accept both power and data to the RAVENNA/AES67 network. These ports, designated primary and secondary, can be configured in redundant mode to provide full network redundancy where infrastructure allows. In this configuration, the unit seamlessly switches from primary to secondary, ensuring continuous audio and power in the event of a link loss or switch failure. 

The ports can also operate in switched mode, enabling daisy-chaining from the secondary port (data only) to an additional unit. This can reduce cabling requirements in some installations. It should be noted that power is not passed through, and daisy-chained units require their own power supply. 

An additional USB-C input is provided as an alternative DC power source where PoE is unavailable. For optimal performance, we recommend the Anker Zolo 30W Compact GaN Charger, or a similar 30W USB-C PSU, for this product. The rear panel includes a threaded hole for securing single/top locking USB-C cables, ensuring a robust and reliable DC connection. For standard USB-C cables, a cable clamp is also fitted to provide strain relief to prevent accidental disconnection.

Configuration and routing are managed via ANEMAN (Merging technologies), offering a familiar and intuitive workflow for AV professionals and system integrators. The platform is designed for straightforward deployment, with minimal setup required beyond network configuration and level alignment. 

All AES3 audio connections are provided via high-quality Neutrik XLR connectors, offering secure, dependable connectivity for professional audio applications. Each input can accept sample rates from 32kHz to 192kHz, which will be sample rate converted to the AoIP system sample rate. A valid input signal is confirmed by front panel AES3 lock LEDs for each input. All outputs follow the RAVENNA/AES67 system sample rate. Front panel status and confidence LEDs provide clear indication of lock, PoE status, network link, and clock synchronisation, allowing for quick diagnostics and system monitoring. The unit is housed in a durable 1U rack-mount aluminium chassis, making it suitable for both fixed installations and mobile rack systems. 

Simple to deploy and highly reliable, the AVN-AESIO8-RAV is an ideal solution for professionals requiring seamless integration between AES3 and RAVENNA/AES67-based networked audio systems. 

The unit is a 1U, 19-inch rack-mount product constructed from aluminium. The AVN-AIORK accessory is available to allow the unit to be rack-mounted with its rear panel facing forward, providing convenient access to all connections. This alternative mounting solution is ideal for setups where frequent cable changes or connection monitoring are required.

Typical Applications

The AVN-AESIO8-RAV is suited to a wide range of professional audio environments where reliable, low-latency transport between digital and networked systems is required. It is ideal for broadcast studios, live production and events, OB trucks, and fixed AV installations such as corporate, education, and hospitality spaces. It also integrates seamlessly into houses of worship and recording studios, providing flexible, high-quality connectivity between traditional digital equipment and RAVENNA/AES67-based audio networks.

Product Data

Technical Specifications

Network and AoIP
AoIP Standard:
RAVENNA/AES67
Number of Channels:
16 receive, 16 transmit
Number of Streams:
16 receive, 16 transmit
Sample Rates:
44.1kHz, 48 kHz, 88.2kHz, 96kHz, 176.4kHz or 192kHz
Format:
Linear PCM, 16, 24 or 32 bit
AES67 Support:
Yes
Connectivity:
2 x RJ45
Speed:
1Gbps or 100Mbps
Aneman Ready:
Yes
AES3 Input Specifications
Input Impedance:
110Ω balanced
Support Input Rates:
32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz and 192kHz (sample rate converted to Dante system sample rate).
Signal Level:
AES3-2009 compliant
Bit Depth:
Up to 24bits
AES3 Output Specifications
Output Impedance:
110Ω balanced
Support Output Rates:
44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz and 192kHz (set as per Dante system sample rate).
Signal Level:
AES3-2009 compliant
Bit Depth:
24 bits
Balanced Line Input XLR Pinout
Pin
Function
1
Chassis Ground
2
Input Positive
3
Input Negative
Balanced Line Output XLR Pinout
Pin
Function
1
Chassis Ground
2
Output Positive
3
Output Negative
PoE Power
Standard
802.3af
Class
0
PD Power Range
0.44 W to 12.94 W
Typical PSE Power Usage
6W
Max PSE Power Usage
15.4 W
Equipment Type
AVN-AESIO8-RAV
8 AES3 Input, 8 AES3 Output RAVENNA Interface, PoE
Physical Specification
Dimensions (Raw):
48cm (W) x 11cm (D) x 4.3cm (H)(1U)
Weight:
Nett: 1.0kg Gross: 1.7kg

Downloads & Resources

Support

Handbooks & Guides

AVN-AESIO8-RAV HandbookDownload ↗

Firmware

No firmware currently listed.

Firmware Notes

Full release notes for all firmware versions will appear here when available.

Brochures

Brochures, guides and supporting literature are available from the Sonifex brochures library.Visit brochures page ↗

Declarations

Access CE and UKCA declarations and other product compliance documentation.Visit declarations page ↗