GPIO Devices

AVN-GPIO

AVN-GPIO GPIO to LAN Transceiver (PTP, EMBER+ & UDP)

The AVN-GPIO is part of the AVN range of network interface boxes, which converts GPIO (General Purpose Inputs & Outputs) to network commands to control, and be controlled by, other equipment or software across a standard network.

About AVN-GPIO

At a Glance

The AVN-GPIO converts GPIO (General Purpose Inputs & Outputs) to network commands, allowing it to control, and be controlled by, other equipment or software across a standard network. It is powered by PoE or an optional 12VDC power supply (AVN-DC024). It has 10 configurable GPIOs, 8 of which can be used for PTP-based programming, together with a relay. It also provides virtual GPIO, allowing the device to trigger or be triggered by other Sonifex devices on the network without the need for additional wiring (virtual GPIO communication occurs via the Ethernet connection). Virtual GPIO supports Ember+ parameter types other than Boolean, and can operate in consumer and provider modes, allowing the AVN-GPIO to control or be controlled by values in remote Ember+ provider trees. Units can either be interfaced together across a network, or Ember+ and UDP commands can be used to accept commands from, or drive, the AVN-GPIO.


PTP Timing

The AVN-GPIO is a PTP (Precision Time Protocol) enabled GPIO device. IEEE1588-2008 PTPv2 is used to keep a hardware clock in sync with a PTP master, such as the AVN-GMCS Grandmaster Clock, achieving sub-10ns synchronisation to the master reference. This allows the AVN-GPIO to accurately timestamp input events and trigger outputs at configured times.

The AVN-GPIO supports Default and AES67 Media profiles, and also provides a Custom profile which can be configured by the user.


Configuration & Routing

The device is configured via a built-in web server. This allows the configuration of PTP as well as live monitoring of its status. A GPIO routing webpage is provided, allowing physical, timed and virtual inputs to be routed to physical, timed and virtual outputs.


UDP Messaging

The AVN-GPIO provides a simple UDP messaging system that allows other devices on the network to query device status information, including GPIO and relay status and event timestamps. Input events can be timestamped using the hardware PTP clock, with both rising and falling edge events detected. Custom applications can also be written to query this information via UDP. Event information, including timestamps and rising or falling edge detection, can also be reported via syslog for remote monitoring. PTP status can also be queried via UDP.


Timed & Normal GPIO

The device has 8 ‘timed’ GPIOs. When used as inputs, these can detect rising and falling edges and generate a timestamp synchronised to the hardware PTP clock. This means that recorded timestamps will be synchronised within 10ns of the PTP master in a correctly set up system. When set up as outputs, a signal can be generated precisely at a configured time, with the time at which the output toggles configurable down to the nanosecond. Alternatively, these timed GPIOs can be configured to act as ‘normal’ GPIOs depending on your application.

There are also two ‘normal’ GPIOs. When configured as inputs, these can be set to either momentary or latching mode. When set up as outputs, they pull the signal on the GPO pin down to ground when active.


Relay, DC Outputs & Housing

The AVN-GPIO has a voltage-free relay contact that can be used to operate external equipment, and also provides 6 x DC output voltage pins that can be used to power external equipment such as signage and various sensors and actuators. When powered via PoE (Power over Ethernet), the AVN-GPIO outputs 12V at 500mA total on these pins. When powered via the DC input (AVN-DC024), the AVN-GPIO provides 12V at 1.5A total on these pins. The DC outputs are fused to prevent drawing more current than the device can provide, and these fuses are automatically reset when the device is power cycled.

It is housed in a rugged aluminium enclosure with provisions for desk mounting, and an optional accessory, AVN-DIORK, allows multiple units to be installed on a 19″ rack-mount shelf.

Typical Applications

The unit can be used to control on-air studio lights. It is suitable for timing and scoring in motorsport events. Legacy GPIO devices can be integrated into a network using this system. The unit enables scheduled or timed switching operations and supports configuration and control of automated systems.

Product Data

Technical Specifications

PTP Timing Specification
Profile Support
IEEE 1588 Default Profile, AES67 Media & Customs Profile
Timing Protocol
PTPv2, IEEE 1588-2008
Timing Accuracy
PTP time stamping resolution 8 nanoseconds
Connections
Network
1 x 100 Mbit/s Ethernet (RJ45/100BASE-TX) with Power over Ethernet (PoE)
DC Power In
1 x 2.5mm locking DC inlet Centre pin positive
GPIO Connector
1 x 24-Pin Phoenix Style Terminal Block
GPIO Format
10 x GPIOs (8 x PTP enabled), configuarable as pull-low inputs or open collector outputs
Voltage Free Relay Contacts
NC, NO, Wiper
Relay Contacts Max Voltage
125V (AC) 30V (DC)
Power over Ethernet (PoE)
Standard
IEEE 802.3af
Class
0
PD Power Range
0.44 W to 12.94 W
Typical PSE Power Usage
2.3W
Max PSE Power Usage
15.4 W
DC Power Out (Powered by PoE)
Voltage
12V DC
Max Current
300mA
DC Power In
Min Voltage
4V DC
Max Voltage
24V DC
Min external supply current
2A
DC Power Out (Powered by DC input)
Voltage
Follows DC Input
Max Current
1A
Ember+ Interface Connection
Interface Type
Provider and Consumer
UDP Interface Connection
Port
31780
Equipment Type
AVN-GPIO
GPIO to LAN Transceiver (PTP, EMBER+ & UDP)
Physical Specification
Dimensions (Raw)
10.6cm (W) x 7.3cm (D) x 4.3cm (H) 4.2" (W) x 2.9" (D) x 1.7" (H)
Dimensions (Boxed)
17.4cm (W) x 9.5cm (D) x 5.6cm (H) 6.9" (W) x 3.7" (D) x 2.2" (H)

Downloads & Resources

Support

Handbooks & Guides

Powering and Controlling SignalLED Signs with an AVN-GPIO GPIO to LAN TransceiverDownload ↗
AVN-GPIO HandbookDownload ↗
AVN-GPIO Ember+ ReferenceDownload ↗

Firmware

Service Discovery (find device IP addresses on your local network)
Download ↗
AVN-GPIO
Version 3.1.398 · 05/08/2026
Download ↗
AVN-GPIO Beta Pre-release
Version 3.1.404 · N/A
Download ↗

Firmware Notes

Full release notes for all firmware versionsDownload ↗

Brochures

Brochures, guides and supporting literature are available from the Sonifex brochures library.Visit brochures page ↗

Declarations

Access CE and UKCA declarations and other product compliance documentation.Visit declarations page ↗