Analogue & Digital Reference Monitors

RM-4C8

Reference Monitor, 4 LED Meters, 8 Channel Inputs & Dual Source Selectors

The RM-4C8 is ideal for monitoring audio channels in an SDI group, or groups of de-embedded AES/EBU channels.

About RM-4C8

With 4 x bright high-resolution 26 segment meter displays and separate left and right source selectors, the RM-4C8 is ideal for monitoring audio channels in an SDI group, or groups of de-embedded AES/EBU channels. The RM-4C8 offers the same functionality as the RM-2S4 but with an additional source selector so that any of the 4 channels in the selected group, or bank, can be monitored independently on left and right speakers. Also, 4 meters are provided so that every channel in the selected group, or bank, can be visually monitored and 4 expansion port groups of 4 channels are allowed, so that all audio channels in an SDI signal can be monitored, using the optional RM-HD1 card.

The audio inputs on the RM-4C8 are auto-sensing, for digital AES/EBU using the left input XLR, or both XLRs for analogue inputs. The inputs can be used in any combination of analogue or digital. With full remote control via GPI, RS232 or USB, a 5 band parametric equaliser, 6 front panel modifier buttons and the ability to take the optional 3G/HD/SD-SDI expansion cards, the RM-4C8 is a flexible and versatile monitoring solution. The same high level of care has been taken in the design of the RM-4C8 as in the RM-2S4 to ensure that it will be the best sounding 1U rack-mount audio monitor that you listen to. This product has settings that can be adjusted using the Sonifex SCi (Serial Control Interface) software.

Typical Applications

Monitoring of multiple audio sources in an OB truck or engineering racks room.

Product Data

Technical Specifications

Inputs
Audio Inputs
8 analogue or AES/ EBU digital channels (autoselecting)
Max level (0dB input gain):
+18dBu (analogue)/0dBFS (digital)
CMRR:
>60dB typical
Input Impedance:
20kΩ (analogue) 110Ω (digital with termination switchable)
AES/EBU Sample Rate:
32 to 192kHz, converted internally to 48kHz
Input Gain:
0, +6, +12 or +18dB digital gain (switchable)
Selection:
2 x Front panel rotary control with indicator LEDs
Line Level Outputs
Audio Outputs:
1 x stereo analogue or AES/EBU digital (switchable)
Gain re Selected Input:
Unity or variable, following volume control (switchable)
Maximum Output Level:
+18dBu (analogue)/0dBFS (digital)
Output Impedance:
<50Ω (analogue)/110Ω (digital)
AES/EBU Sample Rate:
48kHz
Distortion:
<0.02% (1kHz, +8dBu output)
Noise:
-84dB RMS, unity gain ref +8dBu output
Frequency Response:
20Hz-20kHz +0/-0.5dB
Crosstalk
Analogue I/O, ref 0dBu
1kHz input:
<-90dB
10kHz input:
<-85dB
Audio Modifiers
Modifier Selection:
Illuminated front panel pushbuttons
DIM:
Reduces speaker audio level by 10dB
CUT L & CUT R:
Mutes left/right speaker audio
MONO:
Combines left and right audio inputs
PHASE INVERT:
Inverts phase of right audio input
M+S:
Converts stereo input to Middle (sum) and Side (difference) signals
User-Variable Equalisation
Type:
Parametric
Bands:
Five
Centre Frequency:
200Hz to 18kHz
Bandwidth:
0.25 to 2 octaves
Boost/Cut:
±12dB
Programming:
Via USB/serial control port
Amplifier/Loudspeakers
Configuration:
Three-way with stereo mid/ high-frequency drivers & mono low-frequency driver
Power Output:
2 x 5W (HF) + 20W (LF) with protective limiter
Crossover:
500Hz (3rd order Butterworth)
Distortion (HF Outputs):
< 0.05% (1kHz, 3W output)
Distortion (LF Output):
< 0.05% (100Hz, 6W output)
Noise:
More than 80dB below full output
Volume:
Mute to full volume via front panel rotary control
Balance Trim:
±6dB via front panel rotary control
Peak Acoustic Level:
102dB SPL @ 2ft
Level Metering
Number:
4 x 26-segment tri-colour LED bargraphs
Characteristics:
Selectable by switch from:
Characteristics:
1. Dual BBC PPM + standard VU
Characteristics:
2. BBC PPM
Characteristics:
3. EBU PPM
Characteristics:
4. Nordic PPM
Characteristics:
5. AES/EBU digital PPM
Characteristics:
6. DIN PPM
Characteristics:
7. Standard VU
Characteristics:
8. Extended VU
Ballistics:
According to selected characteristic
Line-Up Level:
According to selected characteristic
Phase Metering
Type:
5-segment, indication at 0, 45, 90, 135 and 180 degrees
Remote Control
USB:
Slave device, 19200 baud
Serial:
RS232, 19200 baud, 3-wire connection
Alarm Outputs:
1. Audio underlevel/fail (latching)
Alarm Outputs:
2. Audio overlevel (latching)
Alarm Outputs:
3. Sustained phase error (latching)
Alarm Outputs:
4. AES/EBU input unlock (non-latching) Open-collector outputs rated at 30V, 50mA maximum
Alarm Outputs:
Output low/conducting in normal condition (no alarm)
Control Inputs:
1. Mute audio
Control Inputs:
2. Dim audio
Control Inputs:
3. Alarm reset Pull-to-ground to activate inputs
Status Indicators
LIMIT:
Indicates loudspeaker protection limiter is active.
CLIP:
Indicates internal digital clipping due to overlevel.
LOCK:
Indicates lock achieved on selected digital input(s).
OPT:
For future use.
Connectors
Audio Inputs:
8 x XLR 3-pin female (balanced, may be unbalanced)
Audio Outputs:
2 x XLR 3-pin male (balanced, may be unbalanced)
Headphones:
1/4” (6.35mm) A-gauge 3-pole stereo jack socket
USB:
Type B socket
Serial:
D-sub 9-pin female
Remote I/O:
D-sub 15-pin male
Mains Input:
Filtered 3-pin IEC male, continuously rated 85 - 264VAC, 47 - 63Hz, fused, 60W peak, 30W average
Fuse Rating:
Anti-surge fuse 2A 20 x 5mm
Equipment Type
RM-4C8
Reference Monitor, 4 LED meters, 8 channel inputs & dual source selectors
Physical Specification
Dimensions (Raw):
48cm (W) x 30.5cm (D) x 4.4cm (H) (1U)
Dimensions (Raw):
19” (W) x 12” (D) x 1.73” (H) (1U)
Dimensions (Boxed):
57cm (W) x 52cm (D) x15cm (H)
Dimensions (Boxed):
22.4” (W) x 20.5” (D) x 5.9” (H)
Weight:
Nett: 4.5kg Gross: 6.0kg
Weight:
Nett: 10.0lb   Gross: 13.2lb
Options
RM-HD1:
3G/HD/SD-SDI expansion card
RM-HDE1:
3G/HD/SD-SDI & Dolby® E expansion card

Downloads & Resources

Support

Handbooks & Guides

RM-4C8 HandbookDownload ↗

Firmware

For units before serial number 005951
Version 3.19 · 11/05/2021
Download ↗
For units from serial number 005951
Version 4.03 · 14/08/2023
Download ↗
SCi 2 Software Control Interface (install as an administrator)
Version 2.0.12 · 8/12/2015
Download ↗

Firmware Notes

Release notes for units before serial number 005951Download ↗
Release notes for units from serial number 005951 onwardsDownload ↗

Brochures

Brochures, guides and supporting literature are available from the Sonifex brochures library.Visit brochures page ↗

Declarations

Access CE and UKCA declarations and other product compliance documentation.Visit declarations page ↗