Passive Converters
CM-ULX1
Unbalanced to Balanced Audio Converter
This product allows the connection of a stereo unbalanced line input on phono connectors to a balanced line output via 2 x male XLRs.
About CM-ULX1
This product allows the connection of a stereo unbalanced line input on phono connectors to a balanced line output via 2 x male XLRs. It is transformer balanced, with a 1:2 ratio, so 6dB of gain is added to the input to help interface with the higher signal levels associated with professional outputs. This unit is a passive version of the RB-UL1, and provides you with an alternative to wiring an unbalanced output directly into a balanced input. By placing this box close to the unbalanced output (before the cable run to the balanced input), the connection will benefit from the input device’s common mode rejection capabilities, reducing noise and interference.
This unit uses a stereo unbalanced line phono connector with the following connections:
Pin Type & Connection:
White Tip: Left.
White Screen: Ground.
Red Tip: Right.
Red Screen: Ground.
The stereo analogue balanced line output is on two male 3 pin XLR connectors with the following pin assignments:
Connection:
Pin 1: 0V Common.
Pin 2: Phase.
Pin 3: Non Phase.
Typical Applications
Creates a connection of a stereo unbalanced line input on phono connectors to a balanced line output via 2 x male XLRs.Product Data
Technical Specifications
Audio Specification
Connections
Equipment Type
Physical Specification
Downloads & Resources
Support
Handbooks & Guides
Firmware
No firmware currently listed.
Firmware Notes
Full release notes for all firmware versions will appear here when available.



