Passive Converters

CM-LUX1

Balanced to Unbalanced Audio Converter

This product allows the connection of a stereo balanced line input via 2 x female XLRs to a stereo unbalanced output on phono connectors.

About CM-LUX1

This product allows the connection of a stereo balanced line input via 2 x female XLRs to a stereo unbalanced output on phono connectors.

It is transformer balanced, with a 2:1 ratio, so 6dB of attenuation is added to the input to help interface with the lower signal levels associated with consumer outputs.

This unit is a passive version of the RB-LU4 (though only 1 x stereo channel), and provides you with an alternative to having to interface a balanced output to an unbalanced input via specialist cables (either by shorting the non-phase to ground or disconnecting it).

It is particularly useful where a shared balanced audio feed needs interfacing to an unbalanced input on one or more pieces of equipment. Using a CM-LUR1 or CM-LUX1 galvanically isolates the audio, allowing you to connect via phono cables to an unbalanced input without compromising the distributed feed.

Analogue Inputs

The stereo analogue input is on two female 3 pin XLR connectors with the following pin assignments:
Pin 1: 0V Common
Pin 2: Phase
Pin 3: Non Phase

RCA Phono Analogue Outputs

This unit uses a stereo unbalanced line output on a RCA phono connector with the following connections:

Pin Type – Connection
White Tip: Left
White Screen: Ground
Red Tip: Right
Red Screen: Ground

Typical Applications

Creates a connection of a stereo balanced line input via 2 x female XLRs to a stereo unbalanced output on phono connectors.

Product Data

Technical Specifications

Audio Specification
Input/Output Level Ratio:
02:01
Input/Output Impedance Ratio:
04:01
Max Input Level:
+28dBu
Max Output Level:
+22dBu
Frequency Response:
20Hz to 20kHz, +0/-0.5dB
Noise:
<-115dBu A-wgtd
Distortion Ref +8dBu (Output):
<0.01%
Common Mode Rejection:
>80dB
Connections
Balanced Line Input::
2 x female XLRs
Unbalanced Line Output:
2 x RCA phono connectors
Equipment Type
Dimensions (Raw):
7.7cm (W) x 8.3cm (D) x 4.2cm (H)
Dimensions (Raw):
3.0” (W) x 3.3” (D) x 1.7” (H)
Weight:
Nett: 0.22kg Gross: 0.33kg
Weight:
Nett: 0.49lbs Gross: 0.73lbs

Downloads & Resources

Support

Handbooks & Guides

CM-LUX1 HandbookDownload ↗

Firmware

No firmware currently listed.

Firmware Notes

Full release notes for all firmware versions will appear here when available.

Brochures

Brochures, guides and supporting literature are available from the Sonifex brochures library.Visit brochures page ↗

Declarations

Access CE and UKCA declarations and other product compliance documentation.Visit declarations page ↗