Passive Splitters

CM-AESX3

Single 3 Way AES/EBU Passive Splitter XLR Connectors

The CM-AESX3 is a passive “one-to-three” splitter housed in a small but robust aluminium box.

About CM-AESX3

The CM-AESX3 is a passive “one-to-three” splitter housed in a small but robust aluminium box. It is designed to split a single AES3 digital audio source to up to three destinations, using Neutrik XLR connectors. The CM-AESX3 provides solutions to a range of digital signal distribution problems, where correct termination is essential to maintain signal integrity. The input signal is split through high quality transformers, and 110Ω termination can be applied, if desired, to unconnected outputs. The CM-AESX3 requires no power to operate, ensuring your audio remains connected from source to destination(s) without interruption from power failures.

Typical Applications

Distribution of AES3 source to 3 mixing consoles.

Product Data

Technical Specifications

CM-AESX3: Cable Drive Capability
The table below sets out the minimum signal amplitude required to drive 100m (cumulative) of 110Ω twisted pair cable, based on the sample rate of the digital audio:
Sample Rate Minimum Signal Amplitude
32kHz
*2Vpk-pk
44.1kHz
*2Vpk-pk
48kHz
*2Vpk-pk
88.2kHz
5Vpk-pk
96kHz
5Vpk-pk
* Minimum of 2Vpk-pk is defined by the AES3 format specification.
The table below sets out the minimum signal amplitude required to drive 30m (cumulative) of 110Ω twisted pair cable, based on the sample rate of the digital audio:
176.4kHz
3Vpk-pk
192kHz
3Vpk-pk
Audio Specification
Input & Output Impedances:
110Ω
Insertion Loss:
0.17dB 1:1, 1.3dB 1:3
Impedance Match:
+/- 2%
Max Signal 10 V P-P:
Up to 96kHz
Attenuation Loss:
0.17dB 1:1, 6.2dB 1:3
Connections
Inputs:
1 x XLR 3 pin female
Outputs:
3 x XLR 3 pin male
Equipment Type
CM-AESX3
Single 3 way AES/EBU passive splitter with XLR connectors.
Physical Specification
Dimensions (Raw):
7.7cm (W) x 8.3cm (D) x 4.2cm (H)
Dimensions (Raw):
3.0” (W) x 3.3” (D) x 1.7” (H)
Dimensions (Boxed):
22.9cm (W) x 12.7cm (D) x 7.6cm (H)
Dimensions (Boxed):
9.0” (W) x 5.0” (D) x 3.0” (H)
Weight:
Nett: 0.22kg Gross: 0.33kg
Weight:
Nett: 0.49lbs Gross: 0.73lbs

Downloads & Resources

Support

Handbooks & Guides

CM-AESX3 HandbookDownload ↗

Firmware

No firmware currently listed.

Firmware Notes

Full release notes for all firmware versions will appear here when available.

Brochures

Brochures, guides and supporting literature are available from the Sonifex brochures library.Visit brochures page ↗

Declarations

Access CE and UKCA declarations and other product compliance documentation.Visit declarations page ↗