Headphone Amplifiers

RB-HD2

Dual Stereo Headphone Amplifier

The RB-HD2 is a high performance 2-way stereo headphone distribution amplifier for driving up to 2 pairs of professional stereo headphones from a single stereo or mono input.

RK2_logo-optimized FR3_logo-optimized

About RB-HD2

The RB-HD2 is a high performance 2-way stereo headphone distribution amplifier for driving up to 2 pairs of professional stereo headphones from a single stereo or mono input. A switch on the rear panel enables the distribution of a mono signal to all four outputs (i.e. both earpieces of a pair of stereo headphones) via the left channel input. The stereo/mono switch is located on the rear panel to prevent accidental knocking. The XLR-3 inputs are electronically balanced and can be wired unbalanced. There are two pre-set controls on the rear panel that adjust the level of the master input signal to the outputs. Each output is on a ¼” stereo jack socket and is designed to drive 150mW into 32 ohm to 600 ohm stereo headphones. The outputs are individually buffered with their own front panel volume control. A LED power indicator on the front panel displays the power supply connection.

Typical Applications

Adding headphone outputs to mixer programme output.

Product Data

Technical Specifications

Audio Specification
Input impedance:
>20kΩ balanced bridging (main)
Max Input Level:
+28dBu
Input Gain Range:
-12dB to +20dB gain (pre-set pots)
Output Level:
Drives 150mW into 32Ω to 600Ω headphones
Volume Controls:
-80dB to +11dB gain
Connections
Main Stereo Inputs:
2 x XLR 3 pin female (balanced, can be unbalanced)
Outputs:
2 x ¼” (6.35mm) A-gauge 3-pole stereo jack sockets
Mains Input:
Filtered IEC, switchable 110-120V, or 220-240V, fused, 9W max
Fuse Rating:
Anti-surge fuse 100mA 20 x 5mm (230VAC)
Fuse Rating:
Anti-surge fuse 250mA 20 x 5mm (115VAC)
Equipment Type
RB-HD2
Dual stereo headphone amplifier
Physical Specification
Dimensions (Raw):
48cm (W) x 10.8cm (D) x 4.2cm (H) (1U)
Dimensions (Raw):
19” (W) x 4.3” (D) x 1.7” (H) (1U)
Dimensions (Boxed):
53cm (W) x 20.5cm (D) x 6cm
Dimensions (Boxed):
21” (W) x 8” (D) x 2.4”
Weight:
Nett: 1.35kg Gross: 2.0kg
Weight:
Nett: 3.0lbs     Gross: 4.4lbs

Downloads & Resources

Support

Handbooks & Guides

RB-HD2 HandbookDownload ↗

Firmware

No firmware currently listed.

Firmware Notes

Full release notes for all firmware versions will appear here when available.

Brochures

Brochures, guides and supporting literature are available from the Sonifex brochures library.Visit brochures page ↗

Declarations

Access CE and UKCA declarations and other product compliance documentation.Visit declarations page ↗