AoIP Converters, Radio Capture
AVN-FM16-DNT
16 Stereo Station FM Tuner to Dante
The AVN-FM16-DNT brings FM radio directly onto a Dante® or AES67 audio-over-IP network, allowing up to 16 individually selectable FM stations to be received, monitored and routed as network audio sources. Using dedicated hardware for FM reception and audio capture, it avoids the need for a PC-based tuner and capture system. With dual network and PoE redundancy, remote configuration and RDS/RSSI monitoring, it provides a flexible solution for professional FM monitoring and distribution.
About AVN-FM16-DNT
At a Glance
The AVN-FM16-DNT provides a simple way to bring FM radio into a Dante® or AES67 audio-over-IP network. Designed for professional broadcast environments and 24/7 operation, it receives FM broadcasts and streams selected stations as low-latency Dante® audio across the AoIP network.
With a single RF input and integrated FM tuner, the AVN-FM16-DNT captures up to 16 stations as standard, with field-upgradable licensing available for 24 or 32 stations. Each station is presented as a dedicated Dante® audio source, allowing individual stations to be routed to monitoring systems, recorders, consoles, workstations and other networked audio devices without the need for multiple analogue connections.
Dedicated Hardware for FM Capture
The AVN-FM16-DNT builds on the success of the PC-FM PCIe card, which provided up to 32 stereo channels from a single card for multichannel FM audio logging. The AVN-FM16-DNT uses dedicated hardware for FM reception and audio capture, without relying on a PC-based tuner or operating system drivers.
The unit can also be installed closer to the aerial, with audio and control carried over CAT5/6 network cabling. This simplifies installation by avoiding the need to route multiple aerial feeds back to a PC.
Flexible FM Reception
The AVN-FM16-DNT supports stereo or mono operation, with selectable 50 µs or 75 µs de-emphasis to suit different broadcast standards. A low-bandwidth mode is also available for noisier signals, helping maintain intelligible audio where reception conditions are less than ideal.
RF & RDS Monitoring
The built-in web interface provides RF signal strength (RSSI) monitoring and RDS decoding, with both RSSI and RDS data also available via Ember+ commands. A real-time RF spectrum display helps with aerial positioning and identifying interference or other signal issues.
Remote Configuration
Configuration and remote management are available through the built-in web interface, providing access to FM station frequencies, operating modes, network settings, licensing and other system settings, as well as firmware updates. Signal routing is managed using Dante Controller, while Ember+ provides access to RDS and RSSI information.
Power & Network Redundancy
Dual EtherCON network connections provide full data and PoE power redundancy, delivering resilient network connectivity and power for continuous operation. Audio is delivered at a fixed 48 kHz sampling rate.
Typical Applications
The AVN-FM16-DNT provides a simple way to receive FM broadcasts and distribute them across an AoIP infrastructure for monitoring, recording, routing and processing, without the need for dedicated analogue audio cabling. Typical applications include regulatory compliance monitoring, broadcast testing and advertising analysis.Product Data
Technical Specifications
Specification
Network and AoIP
PoE Power
Equipment Type
Physical Specification
Downloads & Resources
Support
Handbooks & Guides
Firmware
No firmware currently listed.
Firmware Notes
Full release notes for all firmware versions will appear here when available.

