AoIP Converters, Radio Capture

AVN-FM16-DNT

16 Stereo Station FM Tuner to Dante

The AVN-FM16-DNT brings FM radio directly onto a Dante® or AES67 audio-over-IP network, allowing up to 16 individually selectable FM stations to be received, monitored and routed as network audio sources. Using dedicated hardware for FM reception and audio capture, it avoids the need for a PC-based tuner and capture system. With dual network and PoE redundancy, remote configuration and RDS/RSSI monitoring, it provides a flexible solution for professional FM monitoring and distribution.

About AVN-FM16-DNT

At a Glance

The AVN-FM16-DNT provides a simple way to bring FM radio into a Dante® or AES67 audio-over-IP network. Designed for professional broadcast environments and 24/7 operation, it receives FM broadcasts and streams selected stations as low-latency Dante® audio across the AoIP network.

With a single RF input and integrated FM tuner, the AVN-FM16-DNT captures up to 16 stations as standard, with field-upgradable licensing available for 24 or 32 stations. Each station is presented as a dedicated Dante® audio source, allowing individual stations to be routed to monitoring systems, recorders, consoles, workstations and other networked audio devices without the need for multiple analogue connections.


Dedicated Hardware for FM Capture

The AVN-FM16-DNT builds on the success of the PC-FM PCIe card, which provided up to 32 stereo channels from a single card for multichannel FM audio logging. The AVN-FM16-DNT uses dedicated hardware for FM reception and audio capture, without relying on a PC-based tuner or operating system drivers.

The unit can also be installed closer to the aerial, with audio and control carried over CAT5/6 network cabling. This simplifies installation by avoiding the need to route multiple aerial feeds back to a PC.


Flexible FM Reception

The AVN-FM16-DNT supports stereo or mono operation, with selectable 50 µs or 75 µs de-emphasis to suit different broadcast standards. A low-bandwidth mode is also available for noisier signals, helping maintain intelligible audio where reception conditions are less than ideal.


RF & RDS Monitoring

The built-in web interface provides RF signal strength (RSSI) monitoring and RDS decoding, with both RSSI and RDS data also available via Ember+ commands. A real-time RF spectrum display helps with aerial positioning and identifying interference or other signal issues.


Remote Configuration

Configuration and remote management are available through the built-in web interface, providing access to FM station frequencies, operating modes, network settings, licensing and other system settings, as well as firmware updates. Signal routing is managed using Dante Controller, while Ember+ provides access to RDS and RSSI information.


Power & Network Redundancy

Dual EtherCON network connections provide full data and PoE power redundancy, delivering resilient network connectivity and power for continuous operation. Audio is delivered at a fixed 48 kHz sampling rate.


Typical Applications

The AVN-FM16-DNT provides a simple way to receive FM broadcasts and distribute them across an AoIP infrastructure for monitoring, recording, routing and processing, without the need for dedicated analogue audio cabling. Typical applications include regulatory compliance monitoring, broadcast testing and advertising analysis.

Product Data

Technical Specifications

Specification
Tuning Range:
87.5MHz to 108.5MHz in 25kHz steps
Sensitivity:
10uV for 40dB S/N
Maximum Input:
150mV RMS
RF Input Impedance:
75Ω
De-emphasis:
Configurable as 50us or 75us
Audio Distortion:
<0.01%
Number of Stations:
16, (Expandable to 24 and 32)
Network and AoIP
AoIP Standard
Dante
Channels
64 transmit
Flows
32 transmit
Sample Rate
48kHz
Encoding
PCM 16, PCM 24, PCM 32
Connectivity
2 x etherCON (RJ45 compatible)
Speed
1Gbps or 100Mbps (1Gbps recommended)
Network Modes
Switched or redundant
AES67 Support
Yes
Dante Domain Manager Ready
Yes
PoE Power
Standard
802.3af
Redundancy
Yes
Class
0
PD Power Range
0.44 W to 12.94 W
Typical PSE Power Usage
9.3 W
Max PSE Usage
15.4 W
Equipment Type
AVN-FM16-DNT:
16 Station Stereo FM Tuner to Dante
Physical Specification
Dimensions (Raw):
14.0cm (W) x 13.6cm (D) x 4.2cm (H)
Weight:
Nett: 0.3kg Gross: 0.5kg

Downloads & Resources

Support

Handbooks & Guides

AVN-FM16-DNT HandbookDownload ↗

Firmware

No firmware currently listed.

Firmware Notes

Full release notes for all firmware versions will appear here when available.

Brochures

Brochures, guides and supporting literature are available from the Sonifex brochures library.Visit brochures page ↗

Declarations

Access CE and UKCA declarations and other product compliance documentation.Visit declarations page ↗