Analogue & Digital Reference Monitors

RM-HD1

Reference Monitor 3G/HD/SD-SDI Expansion Card

This expansion board allows the monitoring of embedded non-encoded linear PCM audio channels within an 3G/HD/SD-SDI video signal.

About RM-HD1

This expansion board allows the monitoring of embedded non-encoded linear PCM audio channels within an 3G/HD/SD-SDI video signal. The RM-HD1 card can be used with the RM-2S4, RM-2S10 and RM-4C8 monitors. The expansion board can extract any selected AES/EBU audio group (4 channels) from the video signal and pass them to the main Reference Monitor unit for monitoring. Any group can be selected and can also be optionally delayed by up to ~300ms by using the Sonifex SCi remote control software. All channels in the selected group can be monitored visually and 2 channels can be selected to be monitored on the speakers (for the RM-2S4 and RM-2S10, stereo pairs are selected; the RM-4C8 allows any 2 channels to be monitored). The input is auto-sensing for either SD, HD or single link 3G input formats and the extraction of embedded audio complies with SMPTE-272 (SD) and SMPTE-299 (HD/3G). The SDI input is equalized, internally re-clocked and re-transmitted to provide a re-clocked output to pass to external equipment such as another reference monitor.

Typical Applications

OB truck monitoring of incoming video feed from a sports ground. Post Production monitoring of HD-SD/SDI audio.

Product Data

Technical Specifications

SDI Specification
SDI Input:
1 x BNC, 3G/HD/SD-SDI
SDI Outputs:
1 x BNC, 3G/HD/SD-SDI, Re-clocked
Impedance:
75Ω
Output Alignment Jitter:
<0.2UI
Output Level:
800mV +/- 10%
Return Loss:
<15dB at 1500MHz
SDI Supported Standards:
270Mbps, SMPTE-259M-C (SD)
SDI Supported Standards:
1.485 or 1.4835Gbps, SMPTE-292M (HD)
SDI Supported Standards:
2.97 or 2.967Gbps, SMPTE-424M (3G)
Supported Video Formats:
525/59.94 (SMPTE-125M)
Supported Video Formats:
625/50 (ITU-R BT.656)
Supported Video Formats:
720p/23.98, 24, 25, 29.97, 30, 50, 59.94, 60 (SMPTE-296M)
Supported Video Formats:
1035i/59.94, 60 (SMPTE-260M)
Supported Video Formats:
1080i/50, 59.94, 60 (SMPTE-274M)
Supported Video Formats:
1080p/23.98, 24, 25, 50, 59.94, 60 (SMPTE-274M)
Supported Video Formats:
1080pSF/23.98, 24, 25, 29.97, 30 (RP-211)
Supported Video Formats:
1080i/50 (SMPTE-295M)
Supported Video Formats:
1080p/50 (SMPTE-295M)
Embedded Audio:
48kHz, synchronous (HD asynchronous)
Embedded Audio:
SMPTE-272M-ABC
Embedded Audio:
SMPTE-299M
Equipment Type
RM-HD1
3G/HD/SD-SDI expansion card
Physical Specification
Dimensions (Raw):
15cm (W) x 11.5cm (D) x 3.1cm (H)
Dimensions (Raw):
5.9” (W) x 4.5” (D*) x 1.2” (H) (1U)
Dimensions (Boxed):
25cm (W) x 20cm (D) x 10cm (H)
Dimensions (Boxed):
9.8” (W) x 7.9” (D*) x 3.9” (H) (1U)
Weight:
Nett: 0.13kg Gross: 0.4kg
Weight:
Nett: 0.3lb Gross: 0.9lb

Downloads & Resources

Support

Handbooks & Guides

RM-HD1 HandbookDownload ↗

Firmware

RM-HD1
Version 4.1.3 · 03/10/2013
Download ↗

Firmware Notes

RM-HD1 release notesDownload ↗

Brochures

Brochures, guides and supporting literature are available from the Sonifex brochures library.Visit brochures page ↗

Declarations

Access CE and UKCA declarations and other product compliance documentation.Visit declarations page ↗