Belt Packs

CM-BHA

Belt Pack Headphone Amplifier with Limiter & Loudspeaker

The CM-BHA is a portable, battery powered headphone amplifier for use in live applications such as in-the-field news reports.

About CM-BHA

The CM-BHA is a portable, battery powered headphone amplifier for use in live applications such as in-the-field news reports. The unit can apply gain of up to +20dB to the incoming signal. The volume control simultaneously modifies the output volume and the input gain, allowing input signals in excess of +24dBu to be reproduced without distortion.

The CM-BHA has an adjustable limiter to protect the listener from excessive levels indicated by a blue LED. The limiter is only enabled when an earpiece or headphones are used, and when it is activated by the toggle switch. It is disabled when no jack is inserted, allowing a higher volume to be passed to the speaker for “squawk mode” use.

Losing a cue feed due to batteries running out is not an option. With the CM-BHA, a low battery warning LED flashes when the 9V PP3 battery has depleted to 6V, giving plenty of notice to swap the battery. The low power circuitry of the CM-BHA gives up to 200 hours use from a single alkaline 9V PP3 battery.

Typical Applications

Used in TV studio floors, sports grounds and arenas by presenters and cameramen to hear talkback.

Product Data

Technical Specifications

Technical Specification
Input Impedance:
200kΩ electronically balanced
Input Limiter Threshold:
Adjustable -14dBu to 0dBu
Maximum Input Level:
+28dBu
Input Gain/Volume:
Adjustable -70dB to +20dB
Frequency Response:
20Hz – 20kHz ±0.5 (ref 0dBu 1kHz)
Noise:
<-75dBu A-weighted (ref 0dB gain)
Distortion:
<0.015% (ref +8dBu input, 0dB gain,10kΩ load)
Maximum HP Output Level:
+16dBu (ref 9V battery voltage, <1% THD, 2kΩ load)
Maximum HP Output Level:
+12dBu (ref 6V battery voltage, <1% THD , 2kΩ load)
Minimum HP Impedance:
32Ω
Maximum Speaker Level:
+12dBu (ref 9V battery voltage, <1% THD)
Maximum Speaker Level:
+6dBu (ref 6V battery voltage, <1% THD)
Equipment Type
CM-BHA
Belt Pack Headphone Amplifier with Limiter & Loudspeaker
Physical Specification
Dimensions (Raw):
12.5cm (W) x 6.7cm (D) x 4.8cm (H)
Dimensions (Raw):
4.9” (W) x 2.6” (D) x 1.9” (H)
Dimensions (Boxed):
23cm (W) x 13cm (D) x 8cm (H)
Dimensions (Boxed):
9.1 ” (W) x 5.1” (D) x 3.1” (H)
Weight:
Nett: 0.3kg Gross: 0.4kg
Weight:
Nett: 0.7lbs Gross: 0.9lbs

Downloads & Resources

Support

Handbooks & Guides

CM-BHA HandbookDownload ↗

Firmware

No firmware currently listed.

Firmware Notes

Full release notes for all firmware versions will appear here when available.

Brochures

Brochures, guides and supporting literature are available from the Sonifex brochures library.Visit brochures page ↗

Declarations

Access CE and UKCA declarations and other product compliance documentation.Visit declarations page ↗