Passive Splitters
CM-MS3
Single 3 Way Passive Microphone Splitter
The CM-MS3 is a passive “one-to-three” splitter housed in a small but robust aluminium box.
About CM-MS3
The CM-MS3 is a passive “one-to-three” splitter housed in a small but robust aluminium box. It is designed to split a single microphone or line source to up to three destinations, using Neutrik XLR connectors. The unit uses high quality audio transformers that are capable of accepting input levels up to +18dBu, making the splitter useful in both microphone and line level splitting applications.
The CM-MS3 offers three methods of providing phantom power to a microphone connected to its input:
From the external +48VDC power connector.
From a microphone amplifier connected to output 1 (direct).
From a microphone amplifier connected to output 2 (phantom loopback).
Controlling which method is used to provide phantom power is achieved with simple push switches. It is possible to concurrently power a microphone using any two of the above methods without degrading audio performance, thus providing power supply redundancy. Ground loop hum problems can be quickly eliminated using the push switches to lift pin 1 of the output connectors (output 2 and 3 only).
Typical Applications
To share microphones between radio/TV/production studios.Product Data
Technical Specifications
Test: Frequency Response
Test: Total Harmonic Distortion
Test: Total Harmonic Distortion 0.1%
Test: Total Harmonic Distortion 1%
Test: Common Mode Rejection Ratio
Connections
Equipment Type
Physical Specification
Downloads & Resources
Support
Handbooks & Guides
Firmware
No firmware currently listed.
Firmware Notes
Full release notes for all firmware versions will appear here when available.