Source Selectors

RB-SS10

10 Way Stereo Analogue Source Selector/Mixer

The RB-SS10 10 way stereo analogue source selector/mixer is a 1U rack-mount unit that produces a stereo analogue audio output from 10 selectable stereo analogue sources.

RK3_logo-optimized

About RB-SS10

The RB-SS10 10 way stereo analogue source selector/mixer is a 1U rack-mount unit that produces a stereo analogue audio output from 10 selectable stereo analogue sources. There are 10 illuminated front panel push-buttons, which select and indicate the current channel selection. The selection and indication is also available through a remote connector on the rear panel. To stop accidental front panel selection there is a remote input to inhibit the front panel buttons.

Two of the stereo inputs are on XLR so that you can hot-plug audio sources, e.g. portable recorders. As well as being able to act as a source select module, the RB-SS10 can act as a mixer, by enabling the mix mode (using the remote input).

The gain for left and right inputs can be individually adjusted by using the pre-set potentiometers on the front panel. As well as routing the selected audio signal, the unit will also route a remote signal input through the remote connector to the selected input source, for starting external audio equipment such as a CD player.

The front panel headphone output has its own volume control, which is independent of the level adjustment for the main outputs, and has a maximum output level of +12dBu. The volume control can be made to also alter the output level of the main XLR outputs by using a switch on the rear panel to enable/disable this feature.

There is a designation strip on the front panel, useful for giving the buttons a meaningful description. The strip covers the input gain controls so that once configured, they can’t easily be altered – ideal for installation work. The LED on the front panel is used to indicate that power is present on the unit.

Typical Applications

For monitoring multiple stereo audio sources, as a studio on-air switcher, as a 10 stereo channel line input mixer.

Product Data

Technical Specifications

Audio Specification
Input Impedance:
20kΩ bridging
Output Impedance:
<50Ω
Max Input Level:
+28dBu
Max Output Level:
+28dBu
Frequency Response:
20Hz to 20kHz ±0.1dB (600Ω load, ref 1kHz)
Input Gain Range:
Adjustable 8dB loss to 20dB gain (L & R adjust) via front panel adjustable preset potentiometers
Common Mode Rejection:
>66dB typically
Noise:
-96dB unity gain ref +8dBu
Max Headphone Output Level:
+12dBu
Connections
Inputs:
4 x XLR 3 pin female (2 x stereo) (balanced, can be unbalanced)
Inputs:
2 x 25 way D-type socket (female) (4 stereo balanced channels on each)
Outputs:
2 x XLR 3 pin male (stereo balanced, can be unbalanced)
Remote Start I/O:
25 way D-type plug (male)
Remote Select/Switch Inputs:
25 way D-type socket (female)
Status Outputs:
25 way D-type socket (female)
Mains Input:
Filtered IEC, 110V-120V, or 220-240V switchable, fused, 6W maximum
Fuse Rating:
Anti-surge fuse 160mA 20 x 5mm (230VAC)
Fuse Rating:
Anti-surge fuse 315mA 20 x 5mm (115VAC)
Equipment Type
RB-SS10
10 way stereo analogue source selector/mixer
Physical Specification
Dimensions (Raw):
48cm (W) x 10.8cm (D) x 4.2cm (H) (1U)
Dimensions (Raw):
19” (W) x 4.3” (D) x 1.7” (H) (1U)
Dimensions (Boxed):
58.5cm (W) x 22.5cm (D) x 7cm (H)
Dimensions (Boxed):
23” (W) x 8.9” (D) x 2.8” (H)
Weight:
Nett: 1.5kg  Gross: 2.0kg
Weight:
Nett: 3.3lbs Gross: 4.4lbs

Downloads & Resources

Support

Handbooks & Guides

RB-SS10 HandbookDownload ↗

Firmware

No firmware currently listed.

Firmware Notes

Full release notes for all firmware versions will appear here when available.

Brochures

Brochures, guides and supporting literature are available from the Sonifex brochures library.Visit brochures page ↗

Declarations

Access CE and UKCA declarations and other product compliance documentation.Visit declarations page ↗